Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 201Soru →

When a vehicle begins to aquaplane in wet conditions, the steering will feel significantly heavier due to the water resistance acting against the front tyres.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is false. Aquaplaning causes tyres to lose contact with the tarmac and float on a wedge of water, resulting in the steering becoming noticeably light and unresponsive rather than heavy.
The statement is false. When a vehicle aquaplanes, water builds up in front of and under the tyres, lifting them entirely off the road surface. Because there is no longer direct friction between the rubber and the asphalt, steering resistance disappears, causing the steering wheel to feel exceptionally light, loose, and unresponsive.

Adım Adım Çözüm

1
Analyze the physical mechanism of aquaplaning on wet road surfaces.
Aquaplaning occurs when water builds up between the tyre tread and the road surface faster than it can be dispersed, lifting the tyre off the ground.
Understanding the physical separation of the tyre from the road explains the mechanical feedback transmitted to the driver.
2
Evaluate how the loss of tyre-to-road friction influences steering resistance.
Without direct contact with the road surface, steering resistance drops to near zero.
Steering weight depends on tyre grip and friction against the road surface.
3
Determine the validity of the statement.
The driver experiences light, floating steering rather than heavy steering, making the statement false.
Identifying the characteristic warning sign of aquaplaning is essential for correct driver reaction.

Anahtar Kavram

Aquaplaning symptoms and steering feedback
Tahmini Süre:45s
Soru 202Soru →

Match each vehicle handling situation or loss-of-control scenario with the specific electronic safety system intervention that corrects it.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Understeer where the vehicle pushes wide towards the outside of a bend
Heavy emergency braking threatening to lock wheels and eliminate steering control
Drive wheels spinning and losing grip during acceleration on a slippery slope
Driver depressing the brake pedal quickly in an emergency but without sufficient force

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Understeer on a bend is corrected by selectively braking individual wheels to align yaw (ESC); emergency brake wheel lockup is prevented by rapidly pulsing hydraulic pressure to retain steering (ABS); acceleration wheelspin is managed by reducing torque and braking spinning wheels (TCS); and insufficient pedal force during sudden stops is resolved by automatically boosting brake effort to maximum (EBA).
Each active safety system manages a specific handling dynamic: Electronic Stability Control (ESC) prevents yaw divergence during cornering by braking individual wheels; the Anti-lock Braking System (ABS) prevents wheel seizure under harsh braking to preserve steering control; Traction Control (TCS) mitigates driven wheelspin during acceleration; and Emergency Brake Assist (EBA) boosts hydraulic braking pressure to maximum when rapid panic braking is detected.

Adım Adım Çözüm

1
Analyse the cornering instability scenario where the car pushes wide (understeer).
Pair with the system that provides selective individual wheel braking to control yaw (ESC).
Electronic Stability Control is designed to correct directional stability and yaw deviations.
2
Analyse the severe deceleration scenario threatening wheel lockup and loss of steering.
Pair with the system that pulses brake pressure to maintain wheel rotation (ABS).
ABS prevents lockup so lateral tyre grip is maintained for steering during emergency stops.
3
Analyse the acceleration scenario where driven wheels spin on a slippery surface.
Pair with the system that curbs engine power and brakes slipping wheels (TCS).
Traction control manages driven wheel slip under throttle input.
4
Analyse the emergency scenario where pedal application is rapid but lacks full mechanical force.
Pair with the system that detects rapid pedal movement and automatically applies maximum pressure (EBA).
Emergency Brake Assist overcomes driver hesitation to achieve shortest possible stopping distance.

Anahtar Kavram

Active safety systems (ABS, ESC, TCS, and EBA) address distinct vehicle dynamics: wheel lockup under braking, yaw/directional skids in cornering, wheelspin during acceleration, and inadequate pedal pressure during emergency stops.
Tahmini Süre:1m 0s
Soru 203Soru →

You are driving along an urban major road and plan to turn left into a side road. A cyclist is travelling behind you on your left, and pedestrians are waiting at the pavement edge to cross the entrance of the side road. In what chronological sequence should you carry out the following actions to safely complete the turn?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence starts with checking interior and left door mirrors, followed by signalling left in good time, holding back behind the cyclist to avoid cutting across them, yielding to pedestrians waiting to cross the side road, and finally making a final blind-spot check before completing the turn.
Safe execution of a left turn into a minor road follows the Mirror-Signal-Manoeuvre (MSM) routine while respecting the Highway Code Hierarchy of Road Users. The driver must first check rear and nearside mirrors to locate following traffic, then signal their intention. Speed must be moderated to hold back behind any cyclist proceeding straight ahead (Rule H3), followed by yielding to pedestrians waiting to cross the junction mouth (Rule H2 and Rule 170). Once all vulnerable road users are clear and a final blind-spot check is made, the turn can be completed safely.

Adım Adım Çözüm

1
Assess traffic with interior and left door mirrors
Driver identifies the speed and exact positioning of the cyclist on the nearside.
The Mirror-Signal-Manoeuvre (MSM) routine requires thorough observations before giving any signals.
2
Signal left in good time
Surrounding road users, including the cyclist and following vehicles, are alerted to the upcoming turn.
Clear, early signalling gives others sufficient time to react to your intended change of direction.
3
Control speed and hold back behind the cyclist
The risk of a dangerous 'left-hook' collision is eliminated.
Rule H3 of the Highway Code prohibits overtaking or cutting across cyclists who are proceeding straight ahead through or past a junction.
4
Give priority to waiting pedestrians at the junction mouth
Pedestrians are able to cross the entrance of the side road safely.
Rule H2 and Rule 170 require drivers turning into a road to give priority to pedestrians already crossing or waiting to cross.
5
Check blind spots and steer into the side road
The vehicle completes the manoeuvre cleanly and safely into the new road.
A final look ensures that the path remains clear of any late-emerging pedestrians or micromobility users.

Anahtar Kavram

Applying the MSM routine alongside updated Highway Code junction priority rules (Hierarchy of Road Users Rules H2 and H3).
Tahmini Süre:1m 15s
Soru 204Soru →

When using an acceleration lane to merge onto a motorway, what is the correct driving procedure?

Cevabı ve açıklamayı göster

Cevap: Match your speed to the flow in lane 1, give priority to carriageway traffic, and check your blind spot before merging

Cevap

Match your speed to the flow in lane 1, give priority to carriageway traffic, and check your blind spot before merging
According to the Highway Code (Rule 259), when joining a motorway from a slip road, drivers must give priority to traffic already on the main carriageway, regulate their speed to match the traffic flow in the left-hand lane (lane 1), and carry out complete observations, including a crucial right-hand blind spot check before safely merging.

Adım Adım Çözüm

1
Assess motorway traffic speed and identify a suitable gap in lane 1 while proceeding down the acceleration lane.
Vehicle speed matches the pace of the main carriageway traffic flow.
Matching speed prevents causing sudden braking or disruption to existing carriageway traffic.
2
Maintain awareness that main carriageway vehicles hold priority under Highway Code Rule 259.
The joining driver adjusts positioning to yield where necessary rather than forcing entry.
Traffic already on the motorway has right of way over vehicles joining from a slip road.
3
Check mirrors and conduct a final right-shoulder blind-spot check before smoothly steering into the gap in lane 1.
The vehicle merges safely into lane 1 without crossing into further lanes.
A physical blind-spot check verifies that no adjacent vehicle is hidden from mirror view.

Anahtar Kavram

Motorway joining procedure, priority rules, and observation routines under Highway Code Rule 259
Tahmini Süre:1m 0s
Soru 205Soru →

You are waiting at a junction to turn right from a side road onto a dual carriageway. Before pulling out, you assess the central reservation and determine that its width is narrower than the overall length of your car. Which action should you take to maintain safe positioning and avoid obstructing traffic?

Cevabı ve açıklamayı göster

Cevap: Remain at the give-way line of the side road until both sides of the dual carriageway are sufficiently clear to complete the turn in one movement.

Cevap

Remain at the give-way line of the side road until both sides of the dual carriageway are sufficiently clear to complete the turn in one continuous movement.
According to Rule 173 of the Highway Code, when turning right into a dual carriageway, you must assess whether the central reservation is deep enough to protect the full length of your vehicle. If the reservation is not deep enough to shelter your car, you must treat the dual carriageway as a single road and wait at the side road give-way line until there is a safe opening in traffic in both directions, completing the entire manoeuvre in one go.

Adım Adım Çözüm

1
Assess the physical depth of the central reservation relative to vehicle length.
Identify that the central reservation is too narrow to shelter the entire length of the vehicle.
Highway Code Rule 173 requires drivers to determine whether the central reservation can fully contain their vehicle without causing an obstruction.
2
Hold your position behind the give-way line of the side road.
Prevent entering the first carriageway while traffic on the far carriageway is not clear.
Entering prematurely would force the vehicle to halt across active carriageway lanes, creating a dangerous static hazard.
3
Observe traffic flows on both sides of the dual carriageway until a safe opening exists simultaneously in both directions.
Complete the entire right turn in one unbroken manoeuvre directly into the appropriate lane.
A single continuous crossing ensures the vehicle clears all lanes safely without impeding other road users.

Anahtar Kavram

Lane positioning and central reservation assessment when turning right onto a dual carriageway
Tahmini Süre:1m 30s
Soru 206Soru →

You are waiting at a crossroads to turn right, and an oncoming vehicle is also indicating to turn right. If both of you decide to turn nearside to nearside (passing in front of each other), what is the main hazard you must anticipate before turning?

Cevabı ve açıklamayı göster

Cevap: Your view of oncoming traffic travelling straight ahead may be obscured by the other vehicle

Cevap

Your view of oncoming traffic travelling straight ahead may be obscured by the other vehicle
When turning nearside to nearside at a crossroads, you pass in front of the oncoming turning vehicle. While often practical, the other vehicle can block your line of sight, making it difficult to see oncoming traffic that is travelling straight ahead behind it. You must ensure the path is entirely clear before completing your turn.

Adım Adım Çözüm

1
Assess the junction configuration and positioning relative to the oncoming turning vehicle.
Recognise that turning nearside to nearside positions both vehicles front-to-front.
Highway Code Rule 181 outlines turning methods at crossroads and highlights the hazards of each configuration.
2
Identify the sightline limitations caused by the oncoming vehicle's body.
Realise that vehicles approaching straight ahead in the oncoming lane can be hidden behind the turning vehicle.
Vehicles proceeding straight have priority over vehicles turning right across their path.
3
Select the option that correctly identifies this sightline hazard.
Confirmed that the primary danger is obscured oncoming traffic continuing straight ahead.
Careful observation and controlled creeping forward are essential before committing to the turn.

Anahtar Kavram

Highway Code Rule 181: Turning right at crossroads and managing obscured view hazards when turning nearside to nearside.
Tahmini Süre:1m 0s
Soru 207Soru →

While travelling on a smart motorway, you see a speed limit of 50 mph displayed inside a red circle on an overhead gantry sign. What does this signal mean?

Cevabı ve açıklamayı göster

Cevap: It is a mandatory speed limit that you must not exceed

Cevap

The speed limit of 50 mph is a mandatory limit that you must not exceed.
Under Highway Code Rule 261, any speed limit displayed inside a red circle on an overhead motorway gantry is mandatory and legally enforceable. Drivers must not exceed this maximum speed limit.

Adım Adım Çözüm

1
Identify the shape and border colour of the overhead sign
The sign is circular with a red ring border displaying the number 50.
In the UK Highway Code, circular signs with a red border convey mandatory prohibitions or orders.
2
Apply the rule for variable speed limits on motorway gantries
The displayed 50 mph represents an enforceable maximum speed limit for all vehicles in that lane.
Highway Code Rule 261 mandates that drivers must not exceed speed limits shown within red circles on motorway signals.

Anahtar Kavram

Mandatory variable speed limits displayed within red circles on motorway gantries
Tahmini Süre:45s
Soru 208Soru →

On a standard three-lane motorway with free-flowing traffic, for what specific purpose should the right-hand lane (Lane 3) be used?

Cevabı ve açıklamayı göster

Cevap: Exclusively for overtaking slower-moving vehicles before returning to a lane on the left

Cevap

Exclusively for overtaking slower-moving vehicles before returning to a lane on the left
According to Rule 264 of the Highway Code, you must always drive in the left-hand lane (Lane 1) whenever the road ahead is clear. The middle and right-hand lanes (Lanes 2 and 3) are provided solely for overtaking slower-moving vehicles. Once you have safely overtaken, you must move back to the left as soon as it is safe to do so.

Adım Adım Çözüm

1
Identify the fundamental motorway lane discipline rule according to Rule 264 of the Highway Code.
Drivers must stay in the left-hand lane (Lane 1) unless overtaking.
Keeping left maintains uniform traffic flow and prevents congestion.
2
Determine the designated role of the middle and right-hand lanes (Lanes 2 and 3).
Lanes 2 and 3 are designated strictly as overtaking lanes.
Once an overtaking manoeuvre is completed and sufficient space is available, drivers must move back across to the left.

Anahtar Kavram

Motorway Lane Discipline and Overtaking Lanes (Highway Code Rule 264)
Tahmini Süre:45s
Soru 209Soru →

As you prepare to turn right into a side street, you observe an oncoming car displaying a left-turn signal. Which action should you take before proceeding with the turn?

Cevabı ve açıklamayı göster

Cevap: Hold back and wait until the oncoming vehicle has physically started to turn

Cevap

Hold back and wait until the oncoming vehicle has physically started to turn
Holding back until the oncoming vehicle actually commits to turning ensures that you do not cut across the path of a vehicle whose driver forgot to cancel an indicator or intends to turn into an entrance beyond the junction.

Adım Adım Çözüm

1
Assess the oncoming vehicle's approach and signal
Identify that the vehicle is signaling left but may still proceed straight ahead
Vehicle indicators can be forgotten, activated prematurely, or misinterpreted
2
Maintain position on your side of the road and monitor speed and steering of the oncoming vehicle
Observe physical confirmation that the oncoming car is slowing down and turning into the side road
Physical movement confirms intent and eliminates the risk of crossing into the path of an oncoming vehicle
3
Complete the right turn safely when the path is clear
Safely enter the side road without causing danger to other road users
Ensures adherence to UK Highway Code rules regarding junction priority and right turns

Anahtar Kavram

Verifying vehicle signals and confirming intent before turning across oncoming traffic
Tahmini Süre:45s
Soru 210Soru →

A motorist holds a comprehensive motor insurance policy with the class of use specified as 'Social, Domestic and Pleasure' only. The driver begins using the vehicle to deliver fast food orders in return for payment during the evenings. What is the legal status of the vehicle's insurance cover during these delivery journeys?

Cevabı ve açıklamayı göster

Cevap: The vehicle is effectively uninsured because using it for commercial deliveries breaches the policy's specified class of use.

Cevap

The vehicle is effectively uninsured because using it for commercial deliveries breaches the policy's specified class of use.
Every motor insurance policy specifies the permitted 'class of use' (e.g., Social, Domestic and Pleasure; Commuting; or Business/Hire and Reward). Transporting goods, fast food, or passengers for payment is classed as commercial hire and reward. Engaging in this work on a policy limited to Social, Domestic and Pleasure breaches the terms of insurance, invalidating the cover for those journeys and rendering the vehicle legally uninsured on a public road.

Adım Adım Çözüm

1
Identify the declared insurance policy scope and class of use.
The driver holds a policy restricted strictly to 'Social, Domestic and Pleasure' (SD&P) purposes.
Under UK road traffic law, insurance certificates define the permitted categories of vehicle use.
2
Evaluate the nature of the journey against the policy conditions.
Delivering food or parcels in exchange for payment constitutes 'hire and reward' or commercial business use.
Commercial activities are strictly excluded from standard SD&P policies unless specifically added or covered by commercial courier insurance.
3
Determine the legal consequence of operating outside the policy terms.
The vehicle is not covered by valid insurance for that specific use, making the driver guilty of driving without third-party insurance under Section 143 of the Road Traffic Act.
A driver must have valid insurance in force that specifically covers the exact use of the vehicle on a public road at that moment.

Anahtar Kavram

Motor insurance validity depends on complying with the specific class of use stated on the certificate of insurance.
Tahmini Süre:1m 0s
Soru 211Soru →

Road surface arrows on the approach to a roundabout indicate that the left-hand lane is reserved exclusively for left-turning traffic. You intend to travel straight ahead. How should you position your vehicle on approach?

Cevabı ve açıklamayı göster

Cevap: Follow the designated road markings and approach in the lane indicated for straight-ahead traffic

Cevap

Follow the designated road markings and approach in the lane indicated for straight-ahead traffic
According to The Highway Code (Rule 186), when road markings or direction signs designate specific lanes for particular routes, drivers must follow these indications rather than standard default positioning. Because the left lane is dedicated exclusively to left turns, drivers going straight ahead must select the appropriate lane marked for their intended route.

Adım Adım Çözüm

1
Scan advance direction signs and road surface markings well before reaching the junction.
Identified that the left-hand lane is exclusively dedicated to left turns, overriding default lane choice.
Highway Code Rule 186 specifies that specific lane markings and directional arrows take precedence over general roundabout rules.
2
Check mirrors, signal if a lane change is needed early, and select the lane marked for straight-ahead traffic.
The vehicle is positioned in the correct lane in good time.
Proper lane positioning prevents last-minute lane hopping and reduces collision risks at the junction entry.
3
Maintain lane discipline into and across the circulatory carriageway until reaching the intended exit.
Smooth, predictable progress through the roundabout.
Staying within marked lanes avoids cutting across adjacent paths and maintains safety.

Anahtar Kavram

Highway Code Rule 186: Dedicated road markings override general lane discipline rules on roundabout approaches.
Tahmini Süre:1m 0s
Soru 212Soru →

The Highway Code sets out specific legal requirements and safety guidance for the correct use of audible warnings, headlights, auxiliary lights, and hazard signals. Match each road situation with the appropriate use of vehicle lighting or the horn.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Parking a vehicle overnight on a through road where the posted speed limit is 40 mph
Slowing down abruptly due to a sudden queue or obstruction ahead on a motorway
Approaching a sharp, blind bend on a narrow single-track rural road in daylight
Driving in daytime falling snow where forward visibility drops below 100 metres

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Parking overnight on a road with a 40 mph limit matches displaying parking lights (sidelights); slowing abruptly on a motorway matches briefly activating hazard warning lights; approaching a blind bend on a single-track road matches sounding the horn to alert unseen road users; driving in daytime falling snow with visibility under 100 metres matches using dipped headlights and optional fog lights.
Each scenario aligns directly with statutory requirements in the UK Highway Code: parking lights are legally mandated on roads with speed limits over 30 mph (Rules 249/250); hazard lights can be used briefly on high-speed motorways to warn following drivers of sudden queues (Rule 116); sounding the horn is permitted during the daytime to warn unseen road users at blind bends on single-track lanes (Rule 112); and dipped headlights combined with fog lights are designated for visibility below 100 metres (Rule 226).

Adım Adım Çözüm

1
Evaluate night parking lighting regulations under Highway Code Rules 249 and 250.
Vehicles parked on roads with a speed limit exceeding 30 mph must leave parking lights (sidelights) on.
Street lighting on higher-speed roads may be absent or insufficient to ensure a parked vehicle is seen in time by approaching drivers.
2
Review the specific statutory exception for using hazard warning lights while in motion under Rule 116.
Hazard lights may be briefly used on motorways and unrestricted dual carriageways to warn trailing vehicles of severe deceleration or an obstacle.
This alerts high-speed following traffic quickly, preventing multi-vehicle rear-end collisions.
3
Assess audible warning principles under Rule 112.
The horn is used while in motion to inform other road users of vehicle presence, particularly on blind bends or narrow rural tracks.
It acts as a preventative warning where visual lines of sight are entirely blocked.
4
Determine the statutory definition and lighting requirements for seriously reduced visibility under Rule 226.
When visibility falls below 100 metres (such as in heavy falling snow), dipped headlights are mandatory, and fog lights are permitted.
Dipped beams make the vehicle visible without causing blinding glare reflected back from precipitation, while fog lights provide essential extra conspicuity.

Anahtar Kavram

Correct application of the Highway Code regarding stationary parking lights on fast roads, motorway hazard warning signals, daytime horn warnings on blind bends, and fog light deployment thresholds.
Tahmini Süre:1m 15s
Soru 213Soru →

UK road signs use standardised colour schemes, symbols, and bracket notations to inform drivers about route classifications and roadside facilities. Match each sign feature with its correct function or classification.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A blue rectangular sign displaying a white letter 'P' and a bus pictogram
A green directional sign with white destination lettering and yellow route numbering
A brown rectangular sign displaying cutlery and bed pictograms
A directional sign displaying a motorway number enclosed in brackets, such as (M1)

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Blue 'P' with bus symbol pairs with park-and-ride facility; Green sign with yellow route numbers pairs with primary route sign; Brown sign with cutlery and bed pairs with tourist meals and accommodation; Motorway number in brackets pairs with a non-motorway road leading to that motorway.
Each feature is correctly matched according to standard UK Highway Code sign design: blue with 'P' and bus indicates a park-and-ride car park; green with white text and yellow route numbers identifies a primary route; brown indicates tourist services including meals and accommodation; and bracketed motorway designations show that the route leads to the specified motorway.

Adım Adım Çözüm

1
Identify the standard UK sign colour conventions and facility symbols
Blue rectangular signs with a 'P' and public transport symbols denote park-and-ride sites, while brown signs denote tourist attractions and amenities (such as meals and lodging).
The Highway Code reserves distinct background colours and pictograms for specific facility types.
2
Differentiate route classification backgrounds and notation rules
Green backgrounds with yellow route numbers indicate primary routes. Brackets around any route identifier (e.g., '(M1)') indicate a connecting road leading towards that route.
Bracketed route numbers prevent confusion between the road currently being navigated and the ultimate major corridor being joined.
3
Match each individual feature to its corresponding function
All four pairs are mapped accurately to their official UK Highway Code definitions.
Ensures complete alignment with standard traffic sign regulations.

Anahtar Kavram

UK Direction and Information Sign Colour Codes and Notations
Tahmini Süre:1m 15s
Soru 214Soru →

You are the first person to arrive at a secured accident scene where a motorcyclist is lying motionless on their back. They are wearing a full-face helmet with the visor closed. You notice a large piece of debris embedded deeply in their lower leg, which is bleeding heavily. Following the DR ABC protocol and standard DVSA first aid guidelines, which sequence of actions is correct?

Cevabı ve açıklamayı göster

Cevap: Open the helmet visor to check their airway and breathing, leaving the helmet on. Manage the bleeding by applying pressure on either side of the embedded object without removing it, and do not move the casualty.

Cevap

Open the helmet visor to check their airway and breathing, leaving the helmet on. Manage the bleeding by applying pressure on either side of the embedded object without removing it, and do not move the casualty.
The correct sequence prioritizes checking the airway by simply opening the visor, which avoids the high risk of exacerbating a spinal injury by removing the helmet. It also correctly dictates leaving the embedded object in place and applying pressure around it, as removing it can cause rapid blood loss and further tissue damage. Finally, it correctly advises against moving the casualty when they are not in immediate environmental danger.

Adım Adım Çözüm

1
Assess the airway and breathing without removing the helmet.
The casualty's breathing is checked via the opened visor.
Removing a motorcyclist's helmet can cause severe spinal damage and should only be done if the airway cannot be maintained otherwise.
2
Address the severe bleeding around the embedded object.
Pressure is applied on either side of the object, not directly on top of it.
Removing an embedded object can worsen bleeding and cause further tissue damage. Pressing directly on it will push it deeper.
3
Keep the casualty in their current position.
The casualty remains safely on their back.
Unless in immediate danger from a threat like fire or oncoming traffic, an unresponsive casualty with potential spinal injuries should not be moved.

Anahtar Kavram

Incident Scene Casualty Management and Trauma Protocols
Tahmini Süre:2m 0s
Soru 215Soru →

The Vehicle Registration Certificate (V5C) issued by the DVLA serves as definitive legal proof of ownership of the vehicle.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because the Vehicle Registration Certificate (V5C) clearly states on its front page that it is not proof of ownership. Its legal purpose is solely to identify the registered keeper who is responsible for taxing, licensing, and administering the vehicle.

Adım Adım Çözüm

1
Identify the legal function of the Vehicle Registration Certificate (V5C).
The V5C records the vehicle details and names the registered keeper.
The DVLA issues the V5C primarily for taxation, registration, and road safety enforcement.
2
Evaluate whether the registered keeper is legally equivalent to the vehicle owner.
The registered keeper is the person responsible for day-to-day use, road tax, and offences, but not necessarily the legal property owner.
The V5C document prominently carries an official notice stating that it is not proof of ownership.

Anahtar Kavram

The distinction between the registered keeper named on the V5C and the vehicle's legal owner
Soru 216Soru →

While driving along a residential street lined with parked vehicles, you notice white lights illuminated at the rear of a stationary car ahead. What do these lights indicate?

Cevabı ve açıklamayı göster

Cevap: The vehicle is in reverse gear and may begin moving backwards

Cevap

The vehicle is in reverse gear and may begin moving backwards.
White lights displayed at the rear of a vehicle illuminate automatically whenever reverse gear is engaged. This alerts other road users that the vehicle is either actively reversing or preparing to move backwards, requiring approaching drivers to reduce speed, remain alert, and be prepared to stop.

Adım Adım Çözüm

1
Identify the colour and position of the illuminated lights on the observed vehicle
White lights are active specifically at the rear of the car
Vehicle lighting colour coding is standardized under the Highway Code to communicate specific actions.
2
Apply the Highway Code rule for rear white vehicle lights
Determine that reverse gear has been engaged by the driver
White rear lights only activate when the reverse gear is selected, signaling potential rearward travel.
3
Assess the immediate road risk and plan driver response
Anticipate that the vehicle may pull out or reverse into the carriageway and prepare to give way
Drivers reversing often have restricted visibility and require additional space and caution from approaching traffic.

Anahtar Kavram

Vehicle reversing lights and hazard anticipation
Tahmini Süre:1m 0s
Soru 217Soru →

Match each specific motorway emergency scenario with the legally correct action or rule according to the UK Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

You are stranded in a live right-hand lane on a smart motorway and cannot safely exit the vehicle.
You stop in an Emergency Area (EA) and successfully fix a minor mechanical fault yourself.
You break down on the hard shoulder. You have human passengers and a pet dog in the vehicle.
You are safely stopped on the hard shoulder and need to locate the nearest SOS telephone.
You suffer a tyre blowout on a smart motorway segment with no hard shoulder or Emergency Area nearby.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Live lane breakdown matches calling 999 and staying in the vehicle; EA breakdown matches calling the control centre before rejoining; breakdown with pets matches leaving animals inside; locating an SOS phone matches checking 100-metre marker posts; a blowout with no safe stop matches driving to a safe place despite vehicle damage.
Each pairing correctly applies specific UK Highway Code guidelines (Rules 274-283) designed to minimise fatalities during motorway emergencies. The rules prioritize minimizing time spent in live lanes, controlling unpredictable variables such as pets, using established communication infrastructure (SOS phones and 100-metre marker posts), and coordinating with traffic officers before attempting high-risk manoeuvres like rejoining from an Emergency Area.

Adım Adım Çözüm

1
Evaluate the live lane breakdown scenario.
Matches with remaining in the vehicle and calling 999.
Exiting a vehicle in a live right-hand lane is extremely dangerous; the safest option is to stay belted inside and summon emergency services.
2
Evaluate the Emergency Area scenario after fixing a fault.
Matches with using the SOS phone to contact the control centre.
Rejoining a high-speed motorway from a standstill in a short EA is dangerous; the control centre must be contacted to assist, often by closing the adjacent lane.
3
Evaluate the hard shoulder breakdown with a pet.
Matches with evacuating humans but leaving the animal inside.
Pets can panic and run into traffic, causing severe accidents. They must be left securely inside the vehicle.
4
Evaluate the scenario of locating an SOS phone.
Matches with checking the 100-metre marker posts.
Motorway marker posts have arrows specifically designed to point pedestrians toward the nearest emergency telephone.
5
Evaluate the blowout scenario with no safe stopping place.
Matches with continuing to drive despite tyre damage.
Stopping in a live lane is a fatal risk; sacrificing the wheel rim to reach an exit or Emergency Area is the legally advised action.

Anahtar Kavram

Advanced Highway Code breakdown procedures for smart motorways and high-risk scenarios.
Soru 218Soru →

While navigating a winding single-carriageway road, a sudden mechanical fault forces you to stop on the nearside verge shortly before a blind bend. How should you use warning devices to alert approaching traffic to the hazard safely?

Cevabı ve açıklamayı göster

Cevap: Activate your hazard warning lights and place an advance warning triangle on the same side of the road at least 45 metres before the obstruction

Cevap

Activate hazard warning lights and place an advance warning triangle on the same side of the road at least 45 metres before the obstruction.
On non-motorway roads such as single carriageways, drivers should activate their hazard warning lights if the vehicle causes an obstruction and, if safe to do so, position an advance warning triangle at least 45 metres (147 feet) behind the vehicle on the same side of the road to alert approaching traffic well ahead of a blind bend.

Adım Adım Çözüm

1
Assess the road environment and activate hazard warning lights immediately
The disabled vehicle's flashing indicators alert traffic approaching from both directions to an obstruction on the verge.
Hazard lights warn surrounding drivers that the vehicle is temporarily stationary in an unexpected location.
2
Determine if an advance warning device can be deployed safely without entering a motorway context
Because this is an all-purpose single carriageway (not a motorway), an advance warning triangle is permitted and recommended.
Warning triangles must never be used on motorways due to high traffic speeds and slipstreams, but they provide essential advance notice on non-motorway roads.
3
Place the warning triangle on the same side of the road at least 45 metres (147 feet) behind the vehicle
Traffic negotiating the blind bend is given adequate stopping distance and time to react before reaching the disabled car.
Highway Code Rule 274 stipulates a minimum distance of 45 metres on the same side of the road to ensure sufficient warning.

Anahtar Kavram

Highway Code breakdown safety rules on all-purpose roads require activating hazard lights and placing a warning triangle at least 45 metres behind the vehicle on the same side, whereas triangles are strictly forbidden on motorways.
Tahmini Süre:1m 15s
Soru 219Soru →

Carrying a heavy load in the boot causes the rear of your car to dip and the front to rise. How should you adjust your dipped headlights before driving at night?

Cevabı ve açıklamayı göster

Cevap: Adjust the headlight beam aim downwards

Cevap

The headlight beam aim should be adjusted downwards to avoid dazzling oncoming road users.
When a vehicle is heavily loaded at the rear, the back drops and the front lifts up. This tilts the dipped headlights higher, which can blind oncoming drivers. Adjusting the headlights downwards restores the beam to the correct level on the road.

Adım Adım Çözüm

1
Identify the physical effect of a heavy rear load on vehicle pitch
The extra weight depresses the rear suspension, causing the front of the vehicle to lift and tilting the headlight beams higher than normal.
This altered vehicle posture causes standard dipped headlights to shine directly into the eyes of oncoming drivers.
2
Apply the appropriate adjustment control
Use the internal headlight leveling adjuster to angle the light beams downwards.
Deflecting the beam downwards restores the correct illumination area on the road surface ahead without causing dazzle.

Anahtar Kavram

Headlight aim adjustment under heavy rear loading conditions
Tahmini Süre:45s
Soru 220Soru →

Following a collision, a motorcyclist is lying on the carriageway, conscious and breathing with an unobstructed airway. Why must first aiders avoid removing the rider's crash helmet?

Cevabı ve açıklamayı göster

Cevap: To avoid causing or worsening severe neck and spinal injuries

Cevap

The crash helmet must be left in place to avoid causing or worsening severe neck and spinal injuries.
The correct response is that removing the helmet risks causing or worsening serious neck and spinal injuries. In road traffic collisions, motorcyclists are at high risk of sustaining trauma to the cervical spine. Removing a helmet forces the neck to bend and rotate, which can cause permanent spinal cord damage or paralysis. In accordance with UK first aid guidelines and The Highway Code, a motorcyclist's helmet should remain in place unless it is strictly essential to maintain an open airway or perform resuscitation.

Adım Adım Çözüm

1
Assess the casualty's primary survey indicators (airway and breathing).
The casualty is conscious, breathing normally, and maintains a clear, unobstructed airway.
Emergency helmet removal is only permissible when it is strictly necessary to clear an airway or deliver rescue breaths/CPR.
2
Evaluate the biomechanical risk of removing headgear post-collision.
Taking off a snug motorcycle helmet requires pulling, tilting, and rotating the head and neck.
Any movement of the cervical spine can displace fractured vertebrae and sever or compress the spinal cord.
3
Select the correct casualty stabilization procedure under UK first aid standards.
Leave the helmet firmly in place, reassure the casualty, and support their head in a neutral position until emergency medical services arrive.
This protocol minimizes spinal motion and prevents catastrophic secondary injury.

Anahtar Kavram

Casualty Management and Spinal Protection in Road Incidents
Tahmini Süre:1m 0s
ÖncekiSayfa 11 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin