Tüm alıştırma soruları

1884 soru

Soru 181Soru →

You are driving a car that is not fitted with an anti-lock braking system (ABS). If the wheels lock and the vehicle begins to skid during heavy braking on a slippery road, what should you do immediately?

Cevabı ve açıklamayı göster

Cevap: Release the footbrake immediately to allow the wheels to rotate, then reapply progressive braking

Cevap

Release the footbrake immediately to allow the wheels to rotate, then reapply progressive braking.
In a vehicle without ABS, locked tyres lose all lateral grip, making steering impossible. Releasing the footbrake allows the tyres to start turning again, immediately restoring steering capability so the driver can guide the vehicle safely and reapply gentle, progressive braking.

Adım Adım Çözüm

1
Recognise the loss of steering authority caused by locked tyres during hard braking in a non-ABS vehicle.
The driver identifies that sliding tyres cannot provide lateral grip for steering.
Locked wheels cannot steer the vehicle because kinetic sliding friction provides zero directional control.
2
Release the footbrake fully until the wheels regain rotational traction with the road surface.
Tyres begin rolling again, immediately restoring steering response.
Rolling wheels generate lateral cornering forces necessary to steer around hazards.
3
Reapply smooth, progressive cadence braking just below the threshold of wheel lock.
The vehicle decelerates safely and under full directional control.
Threshold braking maintains maximum deceleration without locking the tyres.

Anahtar Kavram

Restoring steering control and traction by releasing locked wheels during non-ABS skid recovery
Tahmini Süre:45s
Soru 182Soru →

Drivers on UK motorways must recognize how maximum speed rules vary across vehicle configurations and electronic gantry signals. Match each motorway scenario to its correct legal speed limit and status.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A solo motorcycle travelling on an unobstructed motorway without active electronic signs
A passenger car towing a lightweight camping trailer
An overhead gantry sign showing '50' enclosed within a solid red ring
An overhead matrix signal showing '30' accompanied by flashing amber lights

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Solo motorcycle matches the national speed limit of 70 mph; car towing a trailer matches the statutory maximum limit of 60 mph; '50' in a red ring matches the mandatory enforceable limit of 50 mph; '30' with flashing amber lights matches the advisory recommended speed of 30 mph.
On UK motorways, cars and solo motorcycles are governed by the 70 mph national speed limit unless signs indicate otherwise. When towing a trailer, this limit reduces to 60 mph. On smart motorways and gantries, variable speed limits displayed within a red ring are legally mandatory, while matrix displays accompanied by amber flashing lights provide advisory guidance.

Adım Adım Çözüm

1
Determine statutory baseline limits for specific vehicle classes under motorway national speed limit rules.
Cars and solo motorcycles can travel up to 70 mph, whereas vehicles towing any trailer are limited to 60 mph.
Vehicle configurations carrying or pulling additional loads have longer stopping distances and lower legal maximum speeds.
2
Differentiate between mandatory electronic variable speed limit signs and advisory motorway hazard warnings.
Signs displaying numbers inside red rings are mandatory; matrix signs displaying numbers with flashing amber corner lights are advisory recommendations.
Red circles dictate legal prohibitions and mandatory caps, while amber flashing lights warn of transient road conditions.
3
Pair each vehicle type and gantry signal description with its exact speed value and legal enforcement status.
All four pairs are uniquely matched.
Each scenario represents a distinct legal regulation defined in the Highway Code.

Anahtar Kavram

Motorway Speed Limits and Gantry Signage Distinctions
Tahmini Süre:1m 0s
Soru 183Soru →

You are driving along an acceleration lane preparing to join the main carriageway of a motorway. In addition to checking your mirrors and signalling, what final safety check should you make before merging?

Cevabı ve açıklamayı göster

Cevap: Take a quick sideways glance over your right shoulder to check the blind spot

Cevap

Take a quick sideways glance over your right shoulder to check the blind spot.
Under the Highway Code, drivers joining a motorway must give priority to traffic already on the main carriageway and ensure it is safe before merging. A quick glance over the right shoulder covers the blind spot area that mirrors cannot show, ensuring you do not pull out into another vehicle.

Adım Adım Çözüm

1
Assess traffic flow on the main carriageway
Identify an appropriate gap in lane 1 while matching speed on the slip road.
Traffic on the main carriageway has priority, so you must merge smoothly without disrupting existing vehicles.
2
Check mirrors and signal your intention to merge
Rearward vision is checked and your intention is communicated clearly.
Signalling informs drivers in lane 1 of your intention to join.
3
Check the right-hand blind spot with a quick over-the-shoulder glance
Confirmation that no vehicle is hidden in the area beside your car.
Mirrors do not cover all areas directly alongside the vehicle, making a shoulder check essential before changing direction.

Anahtar Kavram

Highway Code Rule 259: Joining the motorway safely by checking blind spots in addition to mirrors.
Tahmini Süre:45s
Soru 184Soru →

Electronic Stability Control (ESC) uses the vehicle's braking system to correct a skid, but it can only apply braking force when the driver is actively pressing the footbrake.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because Electronic Stability Control (ESC) does not require the driver to press the brake pedal to function. When onboard sensors detect a deviation between the steering wheel angle and the vehicle's actual direction of travel, the ESC system automatically engages the hydraulic brake pump to apply braking force to individual wheels and may cut engine power to restore vehicle stability.

Adım Adım Çözüm

1
Identify the primary function and operating mechanism of Electronic Stability Control (ESC).
ESC continuously monitors vehicle trajectory using steering angle, wheel speed, and yaw rate sensors to detect loss of lateral traction (understeer or oversteer).
Understanding sensor inputs establishes how the system detects directional instability.
2
Analyze how ESC delivers corrective intervention during dynamic instability.
The system utilizes an internal hydraulic pump to independently apply precise braking force to specific individual wheels and reduce engine power.
To counteract rotational spin or ploughing off course, corrective yaw moments must be generated immediately without relying on driver pedal action.
3
Evaluate the truth value of the stem statement.
The claim that ESC can only apply braking force when the driver presses the footbrake is false.
ESC is an autonomous active safety system designed to intervene during cornering, sudden swerves, or acceleration regardless of driver foot position.

Anahtar Kavram

Autonomous individual wheel braking intervention by Electronic Stability Control (ESC)
Tahmini Süre:1m 0s
Soru 185Soru →

When performing a daily tyre inspection on a standard passenger car, the UK legal minimum requirement dictates that the tread depth must be at least 1.6 mm across the entire edge-to-edge width of the tyre, maintaining this depth continuously around the complete circumference.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False.
The statement is false because the UK Highway Code and vehicle safety regulations mandate a minimum tread depth of 1.6 mm across the central three-quarters of the breadth of the tyre, rather than the entire edge-to-edge width. While the requirement for it to be continuous around the circumference is correct, the width condition renders the claim incorrect.

Adım Adım Çözüm

1
Identify the core legal tread depth requirement for car tyres in the UK.
The minimum legal tread depth is mandated at 1.6 mm.
This is the fundamental statutory limit required to ensure adequate grip and water clearance.
2
Determine the required distribution of this tread depth across the tyre's circumference.
The depth must be maintained in a continuous band around the entire circumference of the tyre.
Tyre wear must not dip below the minimum limit at any point around the rotation of the wheel.
3
Identify the statutory requirement regarding the distribution across the width (breadth) of the tyre.
The law applies specifically to the central three-quarters of the breadth of the tread.
The extreme edges of the tyre are not legally required to meet the 1.6 mm limit, acknowledging that vehicle geometry and cornering naturally cause varying wear patterns at the outer margins.
4
Evaluate the provided statement against these exact legal parameters.
The statement incorrectly claims the 1.6 mm limit must apply across the 'entire edge-to-edge width'.
Because the width specification in the statement explicitly contradicts the precise legal definition (central three-quarters), the entire statement is rendered false.

Anahtar Kavram

Statutory Tyre Tread Depth Dimensions
Soru 186Soru →

Match each tyre condition or scenario to its corresponding legal implication, consequence, or required action according to UK road safety regulations.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Tread depth measures 1.4mm on the outer edge, but maintains 1.8mm across the central three-quarters of the tread breadth around the entire circumference.
A deep sidewall cut exposes the internal cord fabric, although the tyre completely maintains its recommended cold pressure for maximum load.
A space-saver spare wheel is fitted to the driven axle to replace a punctured tyre while travelling on a high-speed dual carriageway.
Continuous and severe steering wheel vibration is experienced primarily when driving at high cruising speeds.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The correct pairings match the 1.4mm outer edge tread to remaining legally permissible, the cut exposing cord to being legally defective, the space-saver spare to a 50 mph restriction, and the steering vibration to unbalanced wheels.
Each match correctly applies UK road traffic law and mechanical principles: 1.6mm tread is only required in the central three-quarters; exposed cords make a tyre illegal regardless of pressure; space-savers have a strict 50 mph limit; and steering vibration indicates wheel imbalance.

Adım Adım Çözüm

1
Evaluate the tread depth scenario against the UK statutory requirement.
The requirement is 1.6mm across the central three-quarters of the breadth. Since the central portion is 1.8mm, the 1.4mm outer edge does not make the tyre illegal.
To verify if uneven wear compromises the specific legal threshold.
2
Assess the structural damage scenario (cut exposing cords) against legal definitions of a defective tyre.
Exposed cords automatically render a tyre legally defective and unsafe for road use, overriding any ability to maintain correct pressure.
To distinguish between cosmetic surface damage and structural failure.
3
Determine the legal limitations of driving with a space-saver spare wheel.
Space-saver wheels must never be driven above 50 mph (80 km/h) and are strictly for temporary emergency use.
To apply manufacturer and legal constraints regarding temporary tyre usage on high-speed roads.
4
Identify the mechanical cause and consequence of high-speed steering vibration.
Steering wheel vibration specifically points to unbalanced front wheels, which accelerates component wear.
To link a common physical driving symptom to its underlying tyre maintenance issue.

Anahtar Kavram

Statutory requirements for tyre condition, tread depth limits, and temporary wheel restrictions.
Soru 187Soru →

You are parked at the left-hand kerb and have checked your interior and exterior mirrors. What final observation must you make before moving off into traffic?

Cevabı ve açıklamayı göster

Cevap: Check your right shoulder blind spot to ensure no road users are alongside

Cevap

Check your right shoulder blind spot to ensure no road users are alongside.
Before moving off from the kerb, checking the blind spot over your right shoulder is essential because door and rear-view mirrors cannot show road users positioned directly alongside the vehicle.

Adım Adım Çözüm

1
Assess the visual coverage provided by vehicle mirrors
Interior and exterior mirrors reveal traffic approaching from the rear but leave unviewed areas alongside the vehicle.
Mirrors have physical limitations in field of view known as blind spots.
2
Perform a final physical observation over the right shoulder before moving off
Any approaching cyclists, motorcyclists, or overtaking vehicles in the blind spot are detected.
Direct shoulder checks ensure 360-degree awareness and prevent pulling out into the path of unseen road users.

Anahtar Kavram

Pre-manoeuvre observation and blind spot checking before moving off
Tahmini Süre:45s
Soru 188Soru →

While driving on a dual carriageway, you realise that you need to reprogram your satellite navigation system (sat-nav). What is the safest and correct action to take?

Cevabı ve açıklamayı göster

Cevap: Pull over and stop in a safe and legal place before adjusting the device

Cevap

Pull over and stop in a safe and legal place before adjusting the device.
The safest and legally compliant action is to pull over and park in a safe, designated place before setting or adjusting navigation equipment. This ensures you do not divert your attention from driving.

Adım Adım Çözüm

1
Recognise the risk of in-vehicle distraction
Avoid attempting to operate or program electronic navigation devices whilst the vehicle is in motion.
Looking at or interacting with a screen takes your eyes and mental focus away from the road ahead.
2
Locate a safe, convenient, and legal stopping place
Safely exit the flow of traffic or pull into a designated lay-by or service area.
The Highway Code requires drivers to retain full control of their vehicle and avoid stopping on active carriageways or prohibited zones.
3
Secure the vehicle and adjust the sat-nav settings
The destination is reprogrammed without compromising driving safety.
Programming navigation equipment while stationary prevents collision risks and ensures undivided attention when driving resumes.

Anahtar Kavram

Highway Code Rule 149 and Rule 150 specify that drivers must exercise proper control of their vehicle at all times and avoid in-vehicle distractions such as programming satellite navigation systems while driving.
Tahmini Süre:45s
Soru 189Soru →

Playing loud music inside your vehicle can create a hazardous distraction by preventing you from hearing emergency vehicle sirens and other external road warnings.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True, because excessive cabin noise drowns out essential acoustic warnings and impairs driver concentration.
The statement is true because loud music interferes with your ability to detect critical sounds outside the vehicle, such as the sirens of approaching ambulances, fire engines, or police vehicles, as well as warning horns from other road users.

Adım Adım Çözüm

1
Analyze the impact of high audio volume on driver alertness and environmental awareness.
Excessive noise reduces the driver's ability to perceive external auditory signals and increases cognitive load.
Auditory cues provide early warning of approaching hazards before they appear in the driver's direct field of view.
2
Evaluate the statement against safe driving principles under the UK Highway Code.
The statement accurately reflects the safety risks associated with loud in-car audio.
Drivers must maintain full concentration and be able to respond promptly to emergency vehicles and acoustic warning devices.

Anahtar Kavram

Managing audio levels to prevent in-vehicle auditory distraction and maintain awareness of external sirens and warnings.
Soru 190Soru →

You are approaching an unmarked crossroads. A Large Goods Vehicle (LGV) approaching from the opposite direction indicates to turn right across your path, and the driver flashes their headlights. A cyclist is travelling straight ahead on the nearside (left) of the LGV. Simultaneously, a horse and rider are approaching the crossroads from the road on your right. According to the Highway Code's rules on priority and the hierarchy of road users, which of the following is the correct assessment and action?

Cevabı ve açıklamayı göster

Cevap: Stop and wait. No one has automatic priority at an unmarked crossroads; treat the flashed headlights merely as a warning, and be prepared to give way to both the vulnerable cyclist and the horse rider.

Cevap

Stop and wait, acknowledging that no one has automatic priority, treating the headlights only as a warning, and giving way to the vulnerable cyclist and horse rider.
At an unmarked crossroads, no vehicle has automatic right of way. The Highway Code explicitly states that flashing headlights only serve to let other road users know you are there, not as a signal to proceed. Furthermore, the updated hierarchy of road users places responsibility on drivers to protect more vulnerable road users, such as cyclists and horse riders. Therefore, the only safe and legally sound action is to stop, wait, and yield to them without causing alarm.

Adım Adım Çözüm

1
Assess the rules for unmarked crossroads.
Identify that no road user has automatic priority at this type of junction.
Establishing the baseline legal priority is required before evaluating specific hazards.
2
Interpret the LGV's flashing headlights.
Determine that the headlights only indicate the LGV's presence, not an invitation to proceed.
Misinterpreting headlights is a common cause of collisions at junctions.
3
Evaluate the presence of the cyclist and the horse rider.
Recognize them as vulnerable road users at the top of the Highway Code hierarchy.
The hierarchy of road users dictates that drivers must take extra care to ensure the safety of more vulnerable groups.
4
Formulate the safest defensive action.
Decide to stop, hold back, avoid using the horn, and wait for the situation to resolve safely.
Combining the lack of priority, the true meaning of flashing headlights, and the presence of vulnerable users requires a cautious, defensive approach.

Anahtar Kavram

Priority at Unmarked Crossroads and Hierarchy of Road Users
Soru 191Soru →

Driver fatigue directly increases a vehicle's braking distance.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Driver fatigue affects reaction time and thinking distance, not the mechanical braking distance.
The statement is false. Driver fatigue slows reaction time and lengthens thinking distance. Braking distance is the physical distance the vehicle travels after the brake pedal is pressed, which is determined by factors such as speed, tyre condition, brake efficiency, vehicle weight, and road surface grip.

Adım Adım Çözüm

1
Separate total stopping distance into its two distinct components.
Total stopping distance equals thinking distance plus braking distance.
Clear separation is required to identify whether a factor affects human reaction or mechanical stopping.
2
Analyze the specific effect of driver fatigue on the stopping process.
Fatigue slows down human reaction time, which increases the thinking distance before the brake pedal is pressed. Braking distance begins only after the brakes are applied and depends solely on vehicle and road conditions.
Driver physical state does not alter vehicle tyre grip, road surface friction, or brake mechanics.

Anahtar Kavram

Distinction between factors affecting thinking distance versus braking distance
Tahmini Süre:30s
Soru 192Soru →

A car is travelling at a constant speed of 60 mph60\text{ mph} (96 km/h96\text{ km/h}) on a dry single carriageway road when the driver notices an obstruction ahead and makes an emergency stop. According to The Official Highway Code, what is the typical overall stopping distance required?

Cevabı ve açıklamayı göster

Cevap: 73 metres73\text{ metres} (240 feet240\text{ feet})

Cevap

The overall stopping distance at 60 mph60\text{ mph} (96 km/h96\text{ km/h}) under dry conditions is 73 metres73\text{ metres} (240 feet240\text{ feet}).
According to The Official Highway Code, at a speed of 60 mph60\text{ mph} (96 km/h96\text{ km/h}) on a dry road, thinking distance is 18 metres18\text{ metres} (60 feet60\text{ feet}) and braking distance is 55 metres55\text{ metres} (180 feet180\text{ feet}). Adding these two values together gives the total stopping distance of 73 metres73\text{ metres} (240 feet240\text{ feet}).

Adım Adım Çözüm

1
Identify the vehicle speed and road condition
Speed is 60 mph60\text{ mph} (96 km/h96\text{ km/h}) on a dry road surface.
Official stopping distances in The Highway Code are defined based on vehicle speed and good dry road conditions.
2
Determine the thinking distance component
Thinking distance at 60 mph60\text{ mph} is 18 metres18\text{ metres} (60 feet60\text{ feet}).
Thinking distance is the distance travelled in the time it takes the driver to perceive the hazard and apply the brakes.
3
Determine the braking distance component
Braking distance at 60 mph60\text{ mph} is 55 metres55\text{ metres} (180 feet180\text{ feet}).
Braking distance is the distance the vehicle travels from the moment the brakes are pressed until it comes to a complete halt.
4
Calculate the total stopping distance
18 metres+55 metres=73 metres18\text{ metres} + 55\text{ metres} = 73\text{ metres} (60 ft+180 ft=240 ft60\text{ ft} + 180\text{ ft} = 240\text{ ft}).
Total Stopping Distance = Thinking Distance + Braking Distance.

Anahtar Kavram

Total Stopping Distance is the sum of Thinking Distance and Braking Distance.
Tahmini Süre:1m 0s
Soru 193Soru →

When searching for a specific building or house number on an unfamiliar urban street, it is safe practice to drive at a reduced speed while scanning roadside properties, provided your hazard warning lights are switched on.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false. Looking away from the road to search for house numbers or roadside features creates a dangerous external distraction. According to the DVSA syllabus and The Highway Code, drivers must keep their full attention on the road and find a safe, legal place to park before searching for addresses or consulting maps.

Adım Adım Çözüm

1
Identify the external distraction trigger and proposed driver action in the scenario.
The driver is continuously scanning roadside buildings and house numbers while the vehicle is in motion.
Searching for external roadside features takes the driver's visual focus and cognitive alertness away from the roadway and potential hazards ahead.
2
Assess the rule regarding the use of hazard warning lights and external scanning while driving.
Under UK road rules, hazard warning lights must not be used as an excuse to drive while distracted or to cruise slowly in traffic.
Hazard warning lights are designed to warn other road users of an obstruction or temporary danger, not to permit distracted driving.
3
Determine the correct Highway Code procedure for locating an unfamiliar address.
The driver should pull over and park safely and legally before checking addresses, street names, or navigation details.
Stationary inspection ensures the driver remains fully alert to road hazards while the vehicle is moving.

Anahtar Kavram

Managing external roadside distractions by stopping safely rather than searching while moving
Tahmini Süre:45s
Soru 194Soru →

As you approach a narrow side road to turn left, a long articulated lorry ahead signals left but swings out towards the centre line before making the turn. What should you do?

Cevabı ve açıklamayı göster

Cevap: Stay well back behind the vehicle and allow it space to complete the manoeuvre

Cevap

Stay well back behind the vehicle and allow it space to complete the manoeuvre.
Long articulated vehicles require a wider turning circle and must often swing out across the road to stop the rear wheels mounting the pavement. Remaining well behind allows the driver adequate clearance and keeps your vehicle visible in their mirrors.

Adım Adım Çözüm

1
Identify the moving hazard and the vehicle type ahead
Recognise that a long articulated vehicle needs extra road space to turn.
Articulated lorries have a large turning circle and an articulated pivot point that causes off-tracking.
2
Interpret the lorry driver's lane positioning
Understand that swinging right before turning left is necessary to prevent the trailer wheels from mounting the kerb.
The driver is not turning right; they are creating clearance for the rear of the vehicle.
3
Adopt a safe defensive following position
Hold back at a safe distance and wait until the junction is clear.
Remaining well back ensures you stay visible in the lorry mirrors and out of the trailer's swept path.

Anahtar Kavram

Recognising the swept path and space requirements of long vehicles as moving hazards
Tahmini Süre:45s
Soru 195Soru →

A car driver experiences a sudden and permanent loss of sight in their left eye. An optician confirms that the vision in their remaining right eye perfectly meets the legal requirement to read a standard number plate from 20 metres. According to official regulations, what must the driver do before returning to the road?

Cevabı ve açıklamayı göster

Cevap: They do not need to notify the DVLA, but they must wait until a medical professional advises that they have fully adapted to seeing with only one eye.

Cevap

The driver is not required to notify the DVLA since they still meet the overall visual standard, but they must refrain from driving until a doctor or optician confirms they have fully adapted to monocular vision.
According to DVLA medical guidelines, standard car drivers are not required to report monocular vision if their remaining eye meets the standard eyesight requirements. However, Rule 92 of the Highway Code states that following a sudden loss of vision in one eye, a driver must not drive until they have been advised by a doctor or optician that they have fully adapted to seeing with only one eye. This adaptation period is critical for safely judging distances and perceiving hazards.

Adım Adım Çözüm

1
Identify the driver's licence category and remaining visual acuity.
The individual is a standard car driver whose remaining eye safely meets the 20-metre standard.
DVLA reporting requirements for vision issues differ significantly between commercial drivers (e.g., lorry/bus) and standard car drivers.
2
Determine the DVLA notification rules for this specific condition.
The driver does not need to formally notify the DVLA.
Standard car and motorcycle drivers are explicitly exempt from reporting monocular (single-eye) vision if their remaining sight meets the legal minimum.
3
Apply the Highway Code safety rules regarding sudden vision changes.
The driver must wait for medical advice confirming full adaptation before driving.
Sudden loss of an eye destroys binocular depth perception, creating a critical hazard until the brain adapts, which is strictly governed by Rule 92 of the Highway Code.

Anahtar Kavram

DVLA notification exemptions and Highway Code safety requirements for sudden monocular vision loss.
Soru 196Soru →

Strong emotions and psychological stress can compromise a driver's concentration, reaction time, and hazard anticipation. How should a responsible driver manage different emotional conditions before or during a trip? Match each emotional situation with its appropriate safe management strategy.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Receiving sudden, distressing personal news before departing
Feeling extreme hostility after a confrontation with another driver
Experiencing mounting frustration when stuck in traffic while running late
Feeling overwhelmed and panicked on a busy high-speed carriageway

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Each emotional condition is correctly matched with its safe mitigation strategy: sudden distressing news requires postponing travel or using alternative transport; intense anger requires pulling over safely to cool off and avoid conflict; time-pressure frustration requires accepting the delay and maintaining safety margins; and acute panic requires leaving the carriageway at the next safe exit to recover.
A driver's state of mind is fundamental to road safety. Safe drivers must recognise when their emotions compromise their driving ability. Pre-journey emotional trauma requires delaying the trip; anger requires stopping safely to disengage and calm down; impatience must be managed by accepting delay; and acute panic on high-speed routes requires taking the next safe exit to decompress.

Adım Adım Çözüm

1
Identify the nature and severity of each emotional state or psychological trigger.
Classified pre-journey grief, active road confrontation, schedule pressure, and high-speed driving panic.
Different emotional triggers require specific preventative or in-journey interventions.
2
Evaluate the primary risk factor for each state according to safe driving standards.
Recognised that grief prevents initial fitness to drive, anger causes aggression, lateness causes tailgating/speeding, and panic undermines high-speed vehicle control.
Understanding the behavioural risk points directly to the correct mitigation strategy.
3
Pair each state with the lawful, DVSA-recommended action that directly eliminates the hazard.
Matched grief to postponing the journey, anger to stopping safely to calm down, impatience to accepting delay, and panic to exiting at the next opportunity.
Ensures the driver prioritises road safety and legal duty of care over journey completion.

Anahtar Kavram

Driver Fitness and Emotional State Management
Tahmini Süre:1m 0s
Soru 197Soru →

A car owner is looking for practical ways to cut fuel costs and reduce exhaust emissions during daily driving. Which measure will reliably improve their vehicle's fuel efficiency?

Cevabı ve açıklamayı göster

Cevap: Dismounting an unused roof rack and removing non-essential heavy items from the vehicle

Cevap

Dismounting an unused roof rack and removing non-essential heavy items from the vehicle
Removing external accessories such as roof racks or roof boxes when they are not in use significantly reduces aerodynamic drag. In addition, taking unnecessary heavy objects out of the boot reduces overall vehicle mass. Together, these measures reduce the engine's required power output, improving miles per gallon (MPG) and cutting exhaust emissions.

Adım Adım Çözüm

1
Evaluate the impact of vehicle weight and aerodynamic drag on engine energy demand.
Excess weight requires more chemical energy to accelerate, and external attachments such as roof racks increase aerodynamic resistance (drag).
Overcoming unnecessary aerodynamic drag and rolling mass forces the engine to burn additional fuel.
2
Assess candidate driving and maintenance actions against eco-safe driving principles.
Removing the roof rack restores streamlined airflow, and clearing heavy items reduces payload mass.
Both adjustments directly minimise engine workload without compromising vehicle safety or control.

Anahtar Kavram

Minimising aerodynamic resistance and vehicle payload optimizes fuel economy and reduces emissions.
Tahmini Süre:1m 0s
Soru 198Soru →

Drivers must understand how alcohol, medications, and illicit substances impair driving performance and the legal rules that apply to them. Which specific impact or requirement correctly corresponds to each of the following drug- and alcohol-related situations?

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Combining a small amount of alcohol with over-the-counter antihistamines
Taking prescription medication that carries a warning about potential drowsiness
Consuming large quantities of coffee after an evening of heavy drinking
Being requested by a police officer to provide a preliminary roadside breath sample

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Combining alcohol with antihistamines multiplies sedative effects and slows hazard response; prescription medication carrying drowsiness warnings requires medical consultation before driving; drinking coffee increases alertness without lowering blood alcohol concentration; and refusing a preliminary roadside breath test without reasonable excuse constitutes a statutory offence.
Each match correctly reflects physiological reality and UK road traffic legislation: combining alcohol and antihistamines compounds sedation unpredictably; warning-labelled prescription drugs require medical guidance; caffeine masks sleepiness without reducing blood alcohol levels; and refusing a lawful breath test is an arrestable offence.

Adım Adım Çözüm

1
Analyze the synergistic interaction between alcohol and sedating medications.
Identified that combining alcohol with antihistamines results in multiplied sedative effects.
Alcohol compounds the depressant effects of antihistamines, drastically reducing alertness and reaction speeds.
2
Determine the driver's duty of care when taking medication with drowsiness warnings.
Matched warning-labelled prescription medicine with seeking professional advice from a doctor or pharmacist.
Drivers are legally obligated to ensure they are fit to drive and must consult healthcare professionals when medicines might impair coordination.
3
Evaluate biological facts versus common myths regarding sobering up.
Linked coffee consumption to masking fatigue without reducing blood alcohol concentration.
Only time allows the liver to break down alcohol; stimulants do not speed up metabolic elimination.
4
Identify the legal consequences of non-compliance during roadside police procedures.
Connected refusal of a roadside breath test to committing a statutory offence.
Refusing a lawful roadside breath test without a reasonable excuse leads directly to arrest and prosecution under the Road Traffic Act.

Anahtar Kavram

Understanding physiological effects of alcohol and drug interactions, debunking sobering myths, and adhering to statutory UK drink- and drug-drive regulations.
Tahmini Süre:1m 0s
Soru 199Soru →

You are driving on a road covered with packed ice and snow. What driving technique should you use to help prevent wheelspin and maintain control of your vehicle?

Cevabı ve açıklamayı göster

Cevap: Drive at a slow speed in the highest gear possible

Cevap

Drive at a slow speed in the highest gear possible
According to the Highway Code, when driving in icy and snowy conditions, drivers should travel at a slow speed in the highest gear possible. This reduces engine torque transmitted to the driven wheels, preventing wheelspin and allowing for smooth, gradual control.

Adım Adım Çözüm

1
Assess the icy surface conditions and understand the risk of wheelspin.
Recognise that sudden torque or harsh inputs break tyre grip on ice.
Traction is severely reduced on snow and packed ice.
2
Select a vehicle control method that minimises engine torque and maintains smooth power delivery.
Choose a higher gear combined with low speed and gentle pedal movements.
Higher gears reduce wheel torque, which helps tyres grip the surface rather than spin.

Anahtar Kavram

Selecting the highest practical gear at slow speeds to minimise wheelspin and maintain tyre grip on ice and snow.
Tahmini Süre:45s
Soru 200Soru →

Under the UK Highway Code, drivers must respond safely and lawfully to different emergency and service vehicles. Match each operational scenario with the correct, legally compliant driver action.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Waiting first in a queue at a red traffic light when an ambulance with flashing blue lights and sirens approaches directly behind you
Driving on a road with solid double white lines when a fire engine displaying flashing blue lights approaches from the rear
Noticing a car displaying a flashing green beacon approaching in moving urban traffic
Approaching a recovery vehicle displaying flashing amber beacons working on the road shoulder ahead

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Waiting at a red light pairs with remaining stationary behind the stop line; driving on a road with solid double white lines pairs with continuing at a safe speed until reaching broken lines or a lay-by; noticing a green flashing beacon pairs with giving priority where safe to a doctor on call with no legal exemptions; approaching amber flashing beacons pairs with reducing speed and providing extra clearance.
Each scenario reflects specific Highway Code guidance: drivers must never commit a traffic offence (such as running a red light) to yield path; drivers should keep moving on double-white-line sections until safe to pull over; green beacons identify doctors on call who have no statutory road law exemptions; and amber beacons warn of breakdown or maintenance operations demanding lower speeds and wider clearance.

Adım Adım Çözüm

1
Assess the legal obligations when stopped at a red traffic signal with an emergency vehicle behind
Identify that drivers must not cross the stop line or enter the junction on red, as doing so breaches road traffic law and endangers other road users.
Highway Code Rule 219 states you must not break the law to let an emergency vehicle through unless directed by a police officer.
2
Evaluate the correct procedure on narrow stretches marked with solid double white lines
Determine that braking harshly in the live lane can cause collisions or force emergency drivers across solid white lines; continuing to a safe pull-off point is required.
Maintaining smooth progression until an appropriate passing area prevents creating a static hazard.
3
Determine the meaning and legal status of a green flashing beacon
Recognise that green beacons represent doctors attending emergencies and require courteous cooperation, though the driver must still obey standard road regulations.
Highway Code Rule 220 distinguishes green medical beacons from blue emergency service beacons.
4
Identify the proper reaction to amber flashing lights on recovery vehicles
Acknowledge the hazard of stationary workers and slow vehicles, requiring reduced speed and wider spacing.
Amber beacons warn of road maintenance, obstruction, or recovery operations.

Anahtar Kavram

Applying UK Highway Code Rules 219 and 220 to emergency vehicle interactions, beacon colours, and legal restrictions.
Tahmini Süre:1m 15s
ÖncekiSayfa 10 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin