Tüm alıştırma soruları

1884 soru

Tüm türler1,884 Çoktan seçmeli962 Çoklu seçim84 Doğru / Yanlış379 Sayısal32 Eşleştirme249 Sıralama178

When waiting to emerge from a junction, you may safely pull out if an oncoming motorcyclist is flashing their left indicator.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The statement is false. In the UK Highway Code and DVSA guidance, drivers waiting at junctions are advised not to rely solely on an oncoming motorcyclist's indicator, as indicators on motorcycles often do not self-cancel and may have been left on inadvertently.

Adım Adım Çözüm

Evaluate the reliability of a motorcycle's active directional indicator at a junction.

Recognise that many motorcycles do not have self-cancelling indicators.

Riders must manually switch off their indicators, meaning signals are sometimes left flashing by mistake.

Determine the safe course of action for a driver emerging from a minor road.

Wait until the motorcycle has actually slowed down and committed to the turn before emerging.

Emerging based solely on a flashing signal creates a severe collision hazard if the rider continues straight ahead.

Anahtar Kavram

Motorcycle Indicator Operation and Junction Observation

Tahmini Süre:45s

Soru 442Soru →

You are driving in the left-hand lane of a motorway and approaching a slower vehicle ahead. What is the correct sequence of actions to overtake safely?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence follows the standard Mirror-Signal-Manoeuvre routine: check interior and right mirrors, signal right in good time, move into the overtaking lane to pass, and check mirrors before signalling to return to the left lane.

Safe overtaking on a motorway strictly follows the Mirror-Signal-Manoeuvre (MSM) routine. First, the driver must check the interior and right-side door mirrors to verify that the overtaking lane is clear of approaching traffic. Second, a right signal must be given in good time to communicate intention. Third, the driver moves out smoothly and completes the pass. Finally, after confirming sufficient clearance in the rear-view and left door mirrors, the driver signals and returns to the left-hand lane in accordance with Highway Code Rule 267.

Adım Adım Çözüm

Perform pre-manoeuvre observation using your interior and right-side door mirrors.

You confirm that the middle lane is clear of approaching or faster-moving traffic.

Highway Code rules require drivers to observe rear and side traffic before altering course.

Apply your right indicator in good time.

Vehicles behind and in adjacent lanes are warned of your intended lane change.

Signalling allows other road users sufficient time to anticipate your movement.

Steer smoothly into the overtaking lane and accelerate past the slower vehicle.

You complete the pass on the right without causing hazard to other road users.

Motorway rules dictate overtaking on the right and maintaining a steady speed while passing.

Check your interior and left door mirrors, signal left, and move back into the left lane.

You return safely to the driving lane once the overtaken vehicle appears in your interior mirror.

Rule 267 of the Highway Code states you should return to the left lane as soon as it is safe to do so.

Anahtar Kavram

Applying the Mirror-Signal-Manoeuvre (MSM) routine to overtake on motorways and returning to the left lane

Tahmini Süre:45s

Soru 443Soru →

You are driving on a rural road with sharp bends and limited forward visibility. A driver behind is tailgating your vehicle. Which TWO actions should you take to manage this situation safely?

Geçerli olan tümünü seçin

Gradually increase your following distance from any vehicle ahead to create a larger safety cushion

Maintain a steady, controlled speed and allow the tailgater to overtake safely when a clear opportunity arises

Tap your brake pedal repeatedly while driving to alert the driver behind to back off

Accelerate briskly beyond the speed limit to widen the distance between your car and the tailgater

Cevabı ve açıklamayı göster

Cevap: Gradually increase your following distance from any vehicle ahead to create a larger safety cushion; Maintain a steady, controlled speed and allow the tailgater to overtake safely when a clear opportunity arises

Cevap

Gradually increase your following distance from any vehicle ahead to create a larger safety cushion, and maintain a steady, controlled speed and allow the tailgater to overtake safely when a clear opportunity arises.

When being followed too closely, the safest defensive driving response is to increase your distance from any vehicle ahead. This ensures that you will not need to brake sharply if a hazard develops, protecting you from a rear-end collision. Maintaining a steady pace and facilitating a safe overtake when possible eliminates ongoing pressure from the aggressive driver.

Adım Adım Çözüm

Assess the forward and rear safety margins in the current driving environment

Recognise that a close-following vehicle significantly reduces your rear safety buffer, especially on winding roads.

You cannot directly control the vehicle behind, so you must manage the overall risk through your own speed and forward positioning.

Ease off the accelerator to open up a larger gap ahead and maintain predictable driving behaviour

You gain extra time and distance to react smoothly to hazards ahead without needing to brake abruptly.

Creating extra forward space compensates for the tailgater's reduced stopping distance and provides a safe opportunity for them to overtake.

Anahtar Kavram

Defensive response to tailgaters: expanding the forward safety buffer and maintaining predictable vehicle control.

Tahmini Süre:1m 0s

Soru 444Soru →

You are driving alone on a monotonous stretch of motorway at 3:00 am. You begin to experience heavy eyelids, frequent yawning, and minor lapses in concentration. You are still 40 miles from your planned destination. The next motorway service area is 15 miles away, but there is a standard exit slip road in just 1 mile. To manage this critical fatigue hazard most safely and legally, which of the following actions should you take?

Leave the motorway at the next available slip road in 1 mile, find a safe and legal place to park off the motorway, consume a caffeinated drink, and take a short nap of about 15 minutes.

Pull over immediately onto the hard shoulder, activate your hazard warning lights, and place a warning triangle 45 metres behind your vehicle before taking a 15-minute nap.

Remain in the left-hand lane, increase your following distance significantly, and fixate exclusively on the vehicle directly ahead to ensure you do not drift out of your lane until you reach the service area.

Shift the vehicle into neutral to coast on downhill sections, reducing engine noise to create a calmer cabin environment while you carefully proceed to the service area 15 miles away.

Cevabı ve açıklamayı göster

Cevap: Leave the motorway at the next available slip road in 1 mile, find a safe and legal place to park off the motorway, consume a caffeinated drink, and take a short nap of about 15 minutes.

Cevap

Leave the motorway at the next available slip road in 1 mile, find a safe and legal place to park off the motorway, consume a caffeinated drink, and take a short nap of about 15 minutes.

The correct action directly applies the Highway Code rules for severe fatigue. When experiencing symptoms like heavy eyelids, drivers must stop as soon as it is safe and legal to do so. Since the hard shoulder is prohibited for resting and 15 miles is too far to continue safely without risking a micro-sleep, leaving at the next immediate exit is mandatory. The official advice for combating tiredness is to drink a caffeinated beverage and take a short nap of around 15 minutes.

Adım Adım Çözüm

Recognize the severe symptoms of fatigue.

Identify that heavy eyelids and concentration lapses indicate an immediate risk of micro-sleeps.

Early recognition of fatigue prevents falling asleep at the wheel on high-speed roads.

Evaluate the available stopping options.

Determine that driving 15 miles to a service area is too dangerous, making the exit in 1 mile the only safe choice.

Continuing to drive while severely fatigued dramatically increases the risk of a fatal collision; the hard shoulder is illegal for resting.

Apply the Highway Code recommended remedy.

Plan to consume a caffeinated drink and take a roughly 15-minute nap after safely parking off the motorway.

This specific combination is clinically proven and officially recommended by the Highway Code to temporarily alleviate driver tiredness.

Anahtar Kavram

Highway Code protocols for managing acute driver fatigue and safe motorway stopping rules.

Alternatif Yöntem

If a passenger is present who is insured and licensed to drive the vehicle, safely switching drivers at the next exit or rest area is an excellent alternative strategy.

Tahmini Süre:1m 30s

Soru 445Soru →

A dedicated school bus has stopped at the roadside ahead and is displaying a flashing amber warning sign on its rear. What action should you take as you approach and pass the vehicle?

Maintain your speed and sound your horn to alert children before passing

Reduce your speed, scan carefully, and be prepared to stop if children cross unexpectedly

Accelerate promptly past the stationary bus before children start alighting onto the pavement

Flash your headlights repeatedly to tell oncoming drivers to yield right of way to you

Cevabı ve açıklamayı göster

Cevap: Reduce your speed, scan carefully, and be prepared to stop if children cross unexpectedly

Cevap

Reduce your speed, scan carefully, and be prepared to stop if children cross unexpectedly

When a school bus displays flashing amber warning lights, it indicates that children are boarding or leaving the bus. Children may be excited, distracted, or unaware of oncoming traffic, often stepping out from obscured areas around the bus. Drivers must slow down, increase observation, and be prepared to stop smoothly at any moment.

Adım Adım Çözüm

Identify the hazard sign displayed on the stopped vehicle

Recognise that a flashing amber sign on the rear of a bus designates it as carrying school children who may be boarding or alighting

Special caution is legally and practically required around school transport because children's road awareness is unpredictable

Anticipate hidden and developing hazards around the bus

Acknowledge that children may emerge suddenly from blind spots created by the bus body

Children often cross directly in front of or behind a bus without checking for approaching traffic

Select the appropriate driving response

Drop vehicle speed significantly, keep a wide scanning pattern, and remain ready to halt instantly

Lower speeds provide the necessary stopping distance to avoid collisions if a pedestrian enters your path

Anahtar Kavram

School Bus Hazard Anticipation and Child Pedestrian Safety

Tahmini Süre:45s

Soru 446Soru →

You are driving behind a large articulated lorry on a wet single-carriageway road. What is the main reason for staying well back rather than following closely?

To stay sheltered from headwinds and reduce your vehicle's fuel consumption

To position your vehicle within the driver's blind spot to avoid headlight reflection

To get a clearer view of the road ahead and increase your stopping margin

To maintain the standard two-second gap without adjusting for wet road conditions

Cevabı ve açıklamayı göster

Cevap: To get a clearer view of the road ahead and increase your stopping margin

Cevap

To get a clearer view of the road ahead and increase your stopping margin

Staying well back from a large vehicle dramatically widens your forward field of vision, allowing you to see oncoming traffic, road signs, and emerging hazards. It also ensures you maintain the required four-second gap for wet conditions and reduces the amount of spray hitting your windscreen.

Adım Adım Çözüm

Identify the vehicle type and weather conditions

Following a large goods vehicle on a wet road surface

Large vehicles obstruct forward vision, and wet conditions double stopping distances

Apply the appropriate safety gap rule

Increase following distance to at least four seconds or more

Doubling the separation distance compensates for reduced tyre grip and spray

Evaluate the visibility benefit of dropping back

Expanded forward sightlines and visible mirrors for the lorry driver

Staying further back allows the driver to see past the lorry to anticipate oncoming hazards and road layout

Anahtar Kavram

Increasing following distances behind large vehicles in wet conditions to maximise visibility and stopping buffer

Tahmini Süre:1m 0s

Soru 447Soru →

You are driving along an urban road and intend to turn left at an upcoming side junction. A cyclist is travelling just ahead of you on the left-hand side. What should you do?

Overtake the cyclist quickly and turn across their path into the side road

Stay behind the cyclist and allow them to pass the junction before you turn

Turn immediately alongside the cyclist while checking only your interior mirror

Focus solely on vehicles ahead in the side road and accelerate past the cyclist

Cevabı ve açıklamayı göster

Cevap: Stay behind the cyclist and allow them to pass the junction before you turn

Cevap

Stay behind the cyclist and allow them to pass the junction before you turn.

Under the Highway Code, drivers must not cut across cyclists going ahead when turning into or out of a junction or changing direction. You should remain behind the cyclist and wait patiently until they have passed the junction safely before making your turn.

Adım Adım Çözüm

Assess the developing situation ahead

Identify that a cyclist is riding on your nearside and you are approaching a left turn.

Cyclists are vulnerable road users who may be proceeding straight ahead past the junction.

Apply the safe junction protocol under the Highway Code

Hold back behind the cyclist and wait for them to clear the junction before initiating the turn.

Cutting across a cyclist's path to make a left turn is illegal and a primary cause of severe left-hook collisions.

Anahtar Kavram

Safe following distance and junction priority when sharing the road with cyclists

Tahmini Süre:40s

Soru 448Soru →

A motorway is operating under a Dynamic Hard Shoulder (DHS) system. The overhead gantry signals for the three standard carriageway lanes all display a mandatory speed limit of 50 mph inside a red ring. However, the gantry signal positioned directly above the hard shoulder is completely unilluminated. If your vehicle suddenly suffers a severe mechanical failure while you are travelling in the left-hand standard lane, what is the legally required course of action?

Safely move onto the hard shoulder and stop, as the unilluminated signal confirms it is currently operating as a traditional emergency refuge.

Proceed to the nearest designated Emergency Area (EA) without stopping, because a blank signal indicates the hard shoulder is actively open as a live traffic lane.

Halt your vehicle in your current lane and activate hazard lights, because an unilluminated gantry over a DHS means that section of tarmac is completely out of bounds.

Steer onto the hard shoulder but match the 50 mph limit before gradually stopping, since mandatory limits on smart motorways apply across all paved surfaces.

Cevabı ve açıklamayı göster

Cevap: Safely move onto the hard shoulder and stop, as the unilluminated signal confirms it is currently operating as a traditional emergency refuge.

Cevap

You should safely move onto the hard shoulder and stop, because the unilluminated signal above it means it is not being used as a live lane and is available as an emergency refuge.

The correct action is to move onto the hard shoulder and stop. Under the Highway Code for Dynamic Hard Shoulder (DHS) motorways, you MUST NOT use the hard shoulder as a running lane unless a specific speed limit is displayed above it. Because the signal is unilluminated (blank), the lane is closed to normal traffic and has reverted to a traditional hard shoulder, making it the correct and legal place to stop in an emergency.

Adım Adım Çözüm

Analyze the gantry signal displayed above the hard shoulder.

The signal is completely unilluminated (blank).

On a Dynamic Hard Shoulder (DHS) system, the status of the hard shoulder changes based on the specific signal displayed directly above it.

Determine the legal meaning of a blank signal over a DHS.

It indicates that the hard shoulder is NOT currently open to traffic as a running lane.

Unlike standard lanes where a blank signal means 'national speed limit applies', a blank signal over a DHS means the lane reverts to its traditional purpose.

Apply the rule to the emergency scenario.

Since it is operating as a traditional hard shoulder, it is safe and legal to use it to stop the broken-down vehicle.

Highway Code rules state that a hard shoulder must only be used for emergencies unless a speed limit is actively displayed above it.

Anahtar Kavram

Dynamic Hard Shoulder signaling rules and emergency protocols

Soru 449Soru →

While driving at 30 mph on a residential street, you catch up to a cyclist riding ahead. The road ahead has oncoming traffic and parked vehicles on both sides. In which order should you carry out the actions to overtake the cyclist safely in accordance with Highway Code Rule 163?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct procedural order is: drop back and check mirrors, wait for a safe gap in oncoming traffic, signal right if needed, pass the cyclist allowing at least 1.5 metres of clearance, and check the interior mirror before returning left.

The correct sequence adheres strictly to the Mirrors-Signal-Manoeuvre (MSM) routine and Highway Code Rule 163. A driver must first drop back to optimize forward visibility and check mirrors, wait for a safe gap without oncoming hazards, signal intent if appropriate, pass leaving at least 1.5 metres of room, and check the interior mirror before returning to the left.

Adım Adım Çözüm

Drop back to a safe following distance and observe mirrors.

You obtain a wider forward view around the cyclist and confirm what is behind your vehicle.

Maintaining adequate distance prevents crowding the cyclist and maximizes forward vision.

Assess the oncoming road space and wait for a clear opening.

You identify a safe window where no oncoming vehicles or road narrowings will conflict with the pass.

Overtaking must only begin when the entire manoeuvre can be executed safely.

Apply the right-turn indicator if required.

Other road users are clearly alerted to your intended path.

Clear communication prevents following drivers from attempting to overtake you at the same time.

Steer smoothly into the overtaking lane, giving at least 1.5 metres of clearance.

The cyclist is passed safely without being buffeted by wind or crowded towards the kerb.

Highway Code Rule 163 mandates at least 1.5 metres clearance when passing cyclists at 30 mph.

Check the interior rear-view mirror and steer back into the left-hand lane.

The vehicle returns to its normal driving line with ample safety margins.

Verifying the cyclist's position in the interior mirror prevents cutting in too closely in front of them.

Anahtar Kavram

Highway Code Rule 163 overtaking sequence and vulnerable road user clearance

Tahmini Süre:1m 0s

Soru 450Soru →

Drivers approaching a pedestrian crossing are legally permitted to overtake the leading moving vehicle within the area marked by white zig-zag lines.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False: UK road regulations strictly prohibit overtaking the leading moving vehicle within the white zig-zag markings on the approach to a pedestrian crossing.

According to UK Highway Code Rules 165 and 191, you must not overtake the leading moving vehicle nearest to a pedestrian crossing within the zig-zag markings, nor overtake any vehicle that has stopped to allow pedestrians to cross, as doing so blocks visibility of vulnerable road users.

Adım Adım Çözüm

Identify the road layout and markings specified in the statement

The statement refers to the approach to a pedestrian crossing marked by white zig-zag lines.

Zig-zag markings designate a controlled zone with strict legal prohibitions to safeguard pedestrians.

Apply the statutory overtaking rules under the UK Highway Code

Rule 191 states that drivers must not overtake the leading moving vehicle nearest the crossing, nor any vehicle that has stopped to let pedestrians cross.

Overtaking in this area restricts sightlines and severely increases the risk of striking a crossing pedestrian.

Anahtar Kavram

Prohibition of overtaking within pedestrian crossing zig-zag markings

Tahmini Süre:45s

Soru 451Soru →

You are driving along a rural road and approach a horse and rider traveling ahead in your lane. In what chronological sequence should you carry out the manoeuvre to pass them safely and courteously?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct chronological sequence begins by slowing down to 10 mph or less and dropping back, followed by checking mirrors and assessing the road ahead for a clear view, then signalling and moving out with at least 2 metres of clearance, driving past slowly and quietly, and finally checking mirrors before rejoining the left lane smoothly once well clear.

When passing horses, the Highway Code requires drivers to be slow, quiet, and courteous. The driver must first slow down to 10 mph or less and hold back to avoid startling the horse. Next, they must check mirrors and ensure the road ahead is completely clear before signalling and moving out with at least 2 metres of clearance. Passing must be conducted smoothly at low engine revs, and rejoining the lane must only occur after checking mirrors to ensure the vehicle is safely clear.

Adım Adım Çözüm

Drop back and decelerate to a maximum of 10 mph well before reaching the horse.

Establishes a calm buffer zone and prevents the animal from being startled by sudden engine noise or proximity.

The Highway Code requires drivers to be particularly courteous and cautious around horses, reducing speed to 10 mph or under.

Check mirrors and observe the forward roadway for hazards, oncoming vehicles, or blind bends.

Confirms that there is sufficient time, visibility, and road space to complete the wide overtake safely.

Passing cannot safely begin until the driver is certain the opposite lane remains unobstructed throughout the manoeuvre.

Signal your intention to move out and steer wide, establishing at least 2 metres of lateral clearance.

Provides clear communication to road users behind and ensures ample physical clearance around the horse.

The Highway Code specifies giving at least 2 metres of passing distance when overtaking horse riders.

Pass the horse and rider at a steady, slow pace while keeping engine revs low and avoiding horn use.

Completes the pass without creating startling sounds or vibrations.

Loud acceleration, sudden speed changes, or horn sounding can trigger flight instincts in horses.

Check interior and door mirrors to verify ample clearance, then steer smoothly back into the driving lane.

Safely resumes normal road position without cutting in sharply ahead of the animal.

Cutting in too soon could crowd the rider or cause the horse to shy.

Anahtar Kavram

Safe and courteous procedure for overtaking vulnerable road users (horse riders) according to UK Highway Code Rules 163 and 215

Tahmini Süre:1m 0s

Soru 452Soru →

You are driving along a road when another driver behind you begins tailgating aggressively and flashing their headlights. What should you do?

Accelerate beyond the speed limit to increase the separation distance

Remain calm, maintain a steady speed, and allow the driver to overtake when safe

Flash your headlights repeatedly and gesture to express your annoyance

Fixate continuously on your rear-view mirror to keep monitoring their movements

Cevabı ve açıklamayı göster

Cevap: Remain calm, maintain a steady speed, and allow the driver to overtake when safe

Cevap

Remain calm, maintain a steady speed, and allow the driver to overtake when safe.

When dealing with an aggressive driver, the safest course of action is to stay calm, maintain a steady, predictable speed, and create an opportunity for them to overtake safely. This removes the hazard without escalating conflict.

Adım Adım Çözüm

Assess the situation without reacting emotionally or aggressively

Driver avoids escalating hostility with the tailgating vehicle

Emotional reactions such as gesturing or brake tapping significantly increase conflict and danger.

Maintain a steady, predictable pace and check forward road conditions

The vehicle remains under full control while scanning ahead for upcoming hazards

Predictable driving allows the trailing driver an opportunity to pass safely without creating panic.

Facilitate a safe overtaking manoeuvre when the road allows

The aggressive driver passes and the hazard is removed

Allowing aggressive road users to get ahead is the safest way to de-escalate road rage.

Anahtar Kavram

De-escalating aggressive driving encounters through calm, defensive driving and conflict avoidance

Tahmini Süre:45s

Soru 453Soru →

While completing an essential late-night cross-country journey, a driver experiences involuntary heavy blinking and drifting within their lane. According to official road safety recommendations, in what sequence should the driver carry out these actions to safely manage this fatigue episode?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

Locate the nearest official service area or motorway exit -> Park the vehicle in a designated parking bay -> Consume two cups of caffeinated coffee -> Take a short nap of around 15 minutes -> Evaluate personal alertness before resuming driving

According to Highway Code Rule 91 and road safety research, the most effective procedure for tackling driver sleepiness is to leave the road at a safe exit, park properly, consume two caffeinated drinks, take a 15-minute nap while the caffeine begins to absorb, and assess alertness before resuming driving.

Adım Adım Çözüm

Find an official exit or motorway service area

Driver avoids dangerous stops on the hard shoulder or live lanes

Highway Code Rule 91 specifies that drivers feeling sleepy must leave the motorway and find a safe, designated resting area.

Park securely in an authorized bay

The vehicle is safely positioned off the highway

Resting requires complete vehicle security in an area clear of live traffic.

Drink two cups of caffeinated coffee or equivalent

Caffeine enters the digestive system to start absorption

Caffeine takes approximately 15 to 20 minutes to cross the blood-brain barrier and enhance alertness.

Take a short 15-minute nap

Short sleep reduces sleep pressure while caffeine takes effect

Combining a brief nap with preceding caffeine intake provides the scientifically proven 'caffeine nap' benefit recommended by road safety authorities.

Perform a self-check for alertness

Driver verifies they are fit to drive before joining traffic

If fatigue persists after a nap, driving must not be resumed until adequate sleep is achieved.

Anahtar Kavram

Highway Code protocol and physiological countermeasures for managing driver fatigue and drowsiness

Soru 454Soru →

As you travel along a dual carriageway during a heavy downpour, your car begins to aquaplane across standing water, causing the steering wheel to feel completely weightless and unresponsive. What should you do to safely regain control?

Brake firmly and immediately steer towards the hard shoulder

Ease off the accelerator gradually and hold the steering wheel straight until grip is restored

Depress the clutch pedal fully and pump the footbrake rapidly

Turn the steering wheel vigorously from side to side to help the tyre tread cut through the surface water

Cevabı ve açıklamayı göster

Cevap: Ease off the accelerator gradually and hold the steering wheel straight until grip is restored

Cevap

Ease off the accelerator gradually and hold the steering wheel straight until grip is restored

When a vehicle aquaplanes, the tyres lose direct contact with the road and ride on a wedge of water. The safest course of action is to ease off the accelerator gently and maintain a straight steering path. As speed reduces, the tyre grooves can displace the standing water, restoring normal grip and steering control smoothly.

Adım Adım Çözüm

Recognise the symptoms of aquaplaning

Identify that the tyres are riding on a film of water due to light steering and engine revs increasing without acceleration

Correct identification prevents panic reactions such as slamming on the brakes or jerking the steering wheel

Remove foot pressure smoothly from the accelerator pedal

Vehicle speed gradually reduces without sudden weight transfer or wheel locking

Allows the weight of the vehicle to settle and gives the tyre tread grooves time to disperse the standing water

Maintain a steady, straight steering direction

The front wheels remain aligned with the direction of travel when tyre contact is re-established

Prevents violent lateral movement or sudden skidding the moment the tyres regain grip on the road surface

Anahtar Kavram

Aquaplaning occurs when water builds up between tyres and the road surface, causing total loss of steering and braking; recovery requires smooth deceleration without harsh braking or steering inputs.

Tahmini Süre:1m 0s

Soru 455Soru →

You are driving towards a zebra crossing and observe pedestrians waiting at the kerb to cross. What should you do?

Flash your headlights to beckon the pedestrians across the road

Overtake any stationary vehicle in front of you within the zig-zag markings to avoid delaying traffic

Slow down, prepare to stop, and give way to the pedestrians waiting to cross

Maintain your speed past parked cars on the approach, assuming pedestrians will wait for a clear gap

Cevabı ve açıklamayı göster

Cevap: Slow down, prepare to stop, and give way to the pedestrians waiting to cross

Cevap

Slow down, prepare to stop, and give way to the pedestrians waiting to cross.

When approaching a zebra crossing with pedestrians waiting at the kerb, you should reduce your speed and prepare to stop safely to allow them to cross. You must not wave them across or flash your headlights, as other road users may not see them.

Adım Adım Çözüm

Scan ahead and identify the zebra crossing and pedestrians waiting at the kerb.

Recognised that pedestrians intend to use the crossing.

Early observation allows you to control your speed smoothly.

Check your mirrors, gently apply brakes to slow down, and prepare to stop before the give-way line.

The vehicle comes to a controlled stop before the crossing without harsh braking.

The Highway Code advises giving way to pedestrians waiting at a zebra crossing and requires giving way once they step onto it.

Anahtar Kavram

Giving way safely to pedestrians waiting at a zebra crossing and avoiding hazardous signals.

Tahmini Süre:45s

Soru 456Soru →

The UK Highway Code specifies national speed limits according to road category and vehicle configuration. Match each driving scenario with the corresponding maximum legal speed limit that applies.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Built-up street with lighting matches 30 mph; Car towing trailer on single carriageway matches 50 mph; Car towing caravan on dual carriageway matches 60 mph; Solo car on motorway matches 70 mph.

Under UK law, speed limits are governed by road classification and vehicle type. Street-lit urban roads default to 30 mph. For vehicles towing trailers or caravans, national speed limits are reduced by 10 mph (50 mph on single carriageways and 60 mph on dual carriageways). Solo passenger cars on unrestricted motorways are permitted to travel up to 70 mph.

Adım Adım Çözüm

Determine the default speed limit for urban areas with street lighting.

30 mph

Under the UK Highway Code, the presence of a continuous system of street lighting denotes a 30 mph limit in built-up areas unless signs show otherwise.

Apply the speed limit rule for a car towing a trailer on a single carriageway.

50 mph

Towing a trailer reduces the national single carriageway speed limit from 60 mph down to 50 mph.

Apply the speed limit rule for a car towing a caravan on a dual carriageway.

60 mph

Towing a caravan reduces the national dual carriageway speed limit from 70 mph down to 60 mph.

Determine the national speed limit for a solo passenger car on a motorway.

70 mph

The national speed limit for solo cars and motorcycles on motorways is 70 mph.

Anahtar Kavram

UK National Speed Limits for Solo Vehicles and Towing Combinations

Tahmini Süre:1m 0s

Soru 457Soru →

You are driving at $60\text{ mph}$ on a single carriageway where winter weather has caused widespread packed ice and snow on the road surface. In normal dry conditions at this speed, the UK Highway Code specifies a $2\text{-second}$ time gap and a total stopping distance of $73\text{ metres}$ ( $240\text{ feet}$ ). According to the Highway Code, what is the minimum safe following time gap you should maintain, and up to what distance can your total stopping distance increase in these icy conditions?

Maintain at least a

4\text{-second}

gap; stopping distance can increase up to

146\text{ metres}

(

480\text{ feet}

)

Maintain at least a

20\text{-second}

gap; stopping distance can increase up to

730\text{ metres}

(

2,400\text{ feet}

)

Maintain at least a

10\text{-second}

gap; stopping distance can increase up to

365\text{ metres}

(

1,200\text{ feet}

)

Maintain at least a

20\text{-second}

gap; stopping distance can increase up to

568\text{ metres}

(

1,860\text{ feet}

) because only braking distance is multiplied

Cevabı ve açıklamayı göster

Cevap: Maintain at least a $20\text{-second}$ gap; stopping distance can increase up to $730\text{ metres}$ ( $2,400\text{ feet}$ )

Cevap

Maintain a following time gap of at least

20\text{ seconds}

and anticipate an overall stopping distance of up to

730\text{ metres}

(

2,400\text{ feet}

According to the UK Highway Code, stopping distances on icy surfaces can be up to ten times greater than in dry conditions. Therefore, at

60\text{ mph}

, the standard

73\text{ metres}

(

240\text{ feet}

) stopping distance increases up to

730\text{ metres}

(

2,400\text{ feet}

), and the standard

2\text{-second}

time gap must be extended up to

20\text{ seconds}

Adım Adım Çözüm

Identify the baseline dry-road stopping distance and following time gap at

60\text{ mph}

The baseline dry stopping distance is

73\text{ metres}

(

240\text{ feet}

) and the standard time gap is

2\text{ seconds}

This establishes the standard reference values specified in the UK Highway Code.

Apply the official weather multiplier for icy and snowy road conditions to the overall stopping distance

73\text{ metres} \times 10 = 730\text{ metres}

(or

240\text{ feet} \times 10 = 2,400\text{ feet}

The Highway Code states that stopping distances on ice and snow can increase by up to ten times.

Scale the required separation time gap by the same factor of ten

2\text{ seconds} \times 10 = 20\text{ seconds}

The separation margin must be increased up to ten times to provide sufficient time to react and stop safely on extremely slippery surfaces.

Anahtar Kavram

Adjusting separation distances and stopping distance expectations in icy driving conditions

Tahmini Süre:1m 30s

Soru 458Soru →

While driving, you press the footbrake pedal and notice that it feels soft and spongy rather than offering firm resistance. What does this symptom indicate about your vehicle's braking system?

The anti-lock braking system is actively operating to correct a wheel skid

Air is present within the hydraulic brake fluid lines

The overall stopping distance will remain safe because the master cylinder compensates automatically

The brake warning light on the dashboard only signals issues with the mechanical handbrake cable

Cevabı ve açıklamayı göster

Cevap: Air is present within the hydraulic brake fluid lines

Cevap

Air is present within the hydraulic brake fluid lines

In a healthy hydraulic braking system, brake fluid is virtually incompressible, creating a firm pedal feel. If air enters the hydraulic lines due to a leak or low fluid level, the air compresses when the pedal is pressed, absorbing pedal force and creating a distinct soft or spongy sensation.

Adım Adım Çözüm

Analyze the pedal symptom described in the scenario

The brake pedal feels soft and spongy instead of providing immediate, firm hydraulic resistance.

A properly functioning hydraulic braking system relies on an incompressible column of fluid to transfer pedal force directly to the brake calipers or drums.

Identify the physical mechanism responsible for spongy pedal feel

Air bubbles in the hydraulic lines compress under foot pressure before transmitting force to the brakes.

Unlike hydraulic fluid, air is compressible, leading to excessive pedal travel and a spongy sensation.

Determine the necessary safety action and conclusion

Recognize that the braking system has air in the hydraulic circuit and must be inspected and bled immediately.

Reduced hydraulic pressure dangerously impairs stopping ability.

Anahtar Kavram

Hydraulic brake operation and fault diagnosis

Tahmini Süre:45s

Soru 459Soru →

You are driving on a narrow rural road during gusty wind conditions. Ahead, you are preparing to overtake a cyclist who is approaching a line of parked vehicles on the left-hand side. Which TWO of the following are essential safety considerations?

Geçerli olan tümünü seçin

Leaving significantly more than the standard 1.5 metres of passing clearance to compensate for sudden crosswinds.

Anticipating that the cyclist may suddenly deviate further into your path to avoid the door zones of the parked vehicles.

Maintaining a strict passing clearance of exactly 1.5 metres to prevent your vehicle from being pushed off the narrow carriageway.

Assuming the cyclist will hold a straight line close to the kerb, as the parked vehicles are static and do not affect their trajectory.

Cevabı ve açıklamayı göster

Cevap: Leaving significantly more than the standard 1.5 metres of passing clearance to compensate for sudden crosswinds.; Anticipating that the cyclist may suddenly deviate further into your path to avoid the door zones of the parked vehicles.

Cevap

You must provide significantly more than 1.5 metres of clearance due to the crosswinds and anticipate that the cyclist will swerve outward to avoid the door zones of the parked cars.

The correct choices identify the dual hazards in this scenario. First, the Highway Code requires leaving at least 1.5 metres of clearance when overtaking cyclists at speeds up to 30 mph, but explicitly states that significantly more room must be given in bad weather, such as high winds, because a gust could blow the cyclist into the vehicle's path. Second, drivers must anticipate that cyclists need a wide berth around parked vehicles to avoid the sudden opening of car doors (the 'door zone').

Adım Adım Çözüm

Assess the environmental conditions and the road layout ahead.

You identify gusty winds and parked vehicles on the nearside as compounding risks.

Environmental factors change baseline safety rules, and static objects can create sudden moving hazards.

Determine the appropriate passing distance for the weather conditions.

You plan to leave considerably more than the standard 1.5-metre minimum clearance.

Gusty winds can blow cyclists off balance and directly into your vehicle's path.

Anticipate the cyclist's required path around the parked vehicles.

You expect the cyclist to move further into the lane to stay out of the dangerous 'door zone'.

Cyclists must ride clear of parked cars to avoid severe injury from doors opening unexpectedly.

Anahtar Kavram

Adjusting safety margins for vulnerable road users based on adverse weather and anticipating hazards from static objects.

Soru 460Soru →

You are driving a car and approaching a junction to turn into a side road. Why must you take extra care regarding the blind spots caused by your vehicle's windscreen pillars?

They only block your view of other road users if your exterior mirrors are incorrectly adjusted.

They only create a hazardous blind spot when you are following closely behind a large goods vehicle.

They can completely obscure approaching vulnerable road users such as cyclists, motorcyclists, and pedestrians.

They only obstruct your forward vision when you fixate solely on the road surface directly ahead.

Cevabı ve açıklamayı göster

Cevap: They can completely obscure approaching vulnerable road users such as cyclists, motorcyclists, and pedestrians.

Cevap

Windscreen pillars can completely obscure approaching vulnerable road users such as cyclists, motorcyclists, and pedestrians.

Windscreen pillars (also known as A-pillars) support the roof and windscreen of the car. Due to modern safety standards, these pillars can be quite thick. At junctions and roundabouts, they can easily hide smaller road users such as pedestrians, cyclists, and motorcyclists who are approaching on a converging path. Drivers must actively move their head to look around both pillars to ensure the path is clear.

Adım Adım Çözüm

Identify the physical obstruction created by vehicle windscreen pillars (A-pillars).

Recognised that the structural pillars framing the windscreen create blind spots in the driver's forward-diagonal field of vision.

Modern vehicle design includes thicker A-pillars for roll-over safety, which widens the angle of blocked vision.

Evaluate the risk this poses to different types of road users at junctions.

Understood that smaller, narrower road users (pedestrians, cyclists, motorcyclists) can easily fit entirely within the pillar's blind spot.

A cyclist or pedestrian moving on a converging path can remain hidden behind the pillar during the entire approach to a junction.

Determine the necessary defensive driving action to overcome this blind spot.

The driver must actively look around the pillars by moving their head before making turns or emerging at junctions.

Mirrors cannot show what is hidden behind the forward pillars, making physical repositioning and thorough scanning essential.

Anahtar Kavram

Windscreen pillar blind spots and their impact on observing vulnerable road users at junctions

Tahmini Süre:50s

ÖncekiSayfa 23 / 95Sonraki

Tüm alıştırma soruları

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Alternatif Yöntem

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm