Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 161Soru →

When sudden hazards or mechanical failures arise on high-speed motorways, drivers must execute exact safety procedures to protect themselves and other road users. For each motorway emergency situation described, what is the mandatory driver protocol required by the UK Highway Code?

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Your vehicle becomes immobilised in a live running lane on an All-Lane Running (ALR) smart motorway and cannot reach a refuge area or verge
You successfully pull onto a standard motorway hard shoulder with passengers and family pets after a total engine failure
You have brought a broken-down vehicle to a complete stop inside an Emergency Area (EA) on a smart motorway
Flames and dense smoke begin escaping from under the engine bonnet while travelling along a motorway section

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Live-lane immobilisation matches remaining inside with seatbelts fastened and dialling 999; hard shoulder stoppage matches left-door evacuation behind the barrier with pets inside and no warning triangle; stopping in an Emergency Area matches using the dedicated SOS phone to contact National Highways; an engine fire matches stopping safely, turning off ignition, evacuating upwind, and never opening the bonnet.
Each scenario is accurately matched to its specific statutory UK Highway Code rule: live-lane immobilisation necessitates remaining belted inside the vehicle while dialling 999; hard shoulder breakdown requires evacuating through the left-hand doors behind the crash barrier while keeping animals inside and never deploying a warning triangle; stopping in an Emergency Area mandates contacting National Highways via the SOS phone before re-entering the motorway; and an under-bonnet fire requires immediate upwind evacuation behind the safety barrier without opening the bonnet.

Adım Adım Çözüm

1
Assess live-lane vs hard shoulder breakdown survival strategies under UK Highway Code Rules 274 and 275.
Identify that live-lane breakdowns require remaining inside the vehicle with seatbelts on and dialling 999, whereas hard shoulder breakdowns require prompt left-side evacuation behind the safety barrier.
Stepping out into active motorway traffic is lethal, whereas remaining in a stationary vehicle on a hard shoulder leaves occupants vulnerable to rear-end impact.
2
Evaluate smart motorway Emergency Area (EA) protocols and vehicle fire management rules.
Confirm that Emergency Areas require using the direct SOS phone to coordinate a safe exit with National Highways, and vehicle fires require immediate evacuation upwind without lifting the bonnet.
Opening a bonnet feeds oxygen to an engine fire, and rejoining high-speed traffic from a short emergency refuge requires traffic management support.

Anahtar Kavram

UK Highway Code Motorway Emergency Protocols (Rules 274–283)
Tahmini Süre:1m 30s
Soru 162Soru →

A driver is the first to arrive at a serious collision blocking an unlit single-carriageway road. In what sequence should the following emergency management actions be carried out to secure the scene safely and effectively?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: first, park safely with hazard lights on to warn traffic; second, don high-visibility clothing and turn off vehicle ignitions; third, contact emergency services (999 or 112) with location details; fourth, check breathing and provide basic first aid to casualties in place.
According to the UK Highway Code and emergency management guidelines, the first priority upon arriving at a collision scene is to protect the scene from further traffic hazards. Once the scene is protected, physical risks such as vehicle ignitions and personal visibility must be managed. Emergency services (999/112) are then contacted with key details, followed by casualty assessment and basic first aid.

Adım Adım Çözüm

1
Protect the scene and warn other traffic
Oncoming traffic is alerted to the blockage, preventing secondary crashes.
Scene safety must be established first to prevent further danger to approaching drivers, casualties, and rescuers.
2
Eliminate scene hazards and enhance personal visibility
Fire and electrical hazards are curtailed and the responder remains visible at night.
Switching off damaged vehicle ignitions significantly reduces the risk of fuel vapor ignition or electrical fires.
3
Alert emergency services (999/112)
Police, ambulance, and fire services are mobilized with accurate situational data.
Professional medical and recovery teams must be dispatched as early as possible once basic scene details are known.
4
Assess and assist casualties
Life-saving basic first aid is administered without aggravating potential spinal injuries.
Casualties should not be moved unless there is an immediate threat such as fire, and should be supported until professionals arrive.

Anahtar Kavram

Prioritization of emergency response and scene safety management at collision sites
Tahmini Süre:1m 30s
Soru 163Soru →

You are driving along a road and plan to pull over to stop on the left-hand side. What observation should you make before you signal and apply the brakes?

Cevabı ve açıklamayı göster

Cevap: Check your interior mirror and left exterior mirror

Cevap

Check your interior mirror and left exterior mirror
According to the Highway Code and official DVSA standards, you must always follow the Mirrors-Signal-Manoeuvre (MSM) routine. Checking the interior mirror and left exterior mirror provides vital information about traffic behind and any vulnerable road users, such as cyclists, who may be filtering along your left side before you signal and slow down.

Adım Adım Çözüm

1
Apply the Mirrors-Signal-Manoeuvre (MSM) routine before any change in speed or course.
Driver checks the interior mirror and left door mirror.
To build an accurate awareness of following vehicles, cyclists, or motorcyclists filtering on the left before taking action.
2
Evaluate the information gathered from mirrors before signalling or braking.
Driver ensures it is safe to indicate and slow down without endangering other road users.
Signalling or braking prematurely without observation can create hazards for following road users.

Anahtar Kavram

Pre-Manoeuvre Observation and the Mirrors-Signal-Manoeuvre (MSM) Routine
Tahmini Süre:45s
Soru 164Soru →

Safe vehicle handling and hazard awareness at night require drivers to adapt their techniques to varying light and road conditions. Match each night driving scenario with its correct driving response according to the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Temporarily dazzled by oncoming high-beam headlights on an unlit road
Approaching a blind bend on an unlit rural single carriageway
Travelling closely behind another moving vehicle on a dark road
Driving on wet asphalt at night under continuous street lighting

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Match being dazzled by oncoming lights with slowing down and looking toward the left-hand verge; approaching a blind bend with watching for headlight sweeps across trees and hedges; driving behind another vehicle with keeping headlights dipped; and driving on wet roads under streetlights with increasing following distance.
Each scenario correctly matches the established UK Highway Code vehicle control principles: averting gaze toward the left kerb avoids dazzle from oncoming beams; scanning roadside vegetation detects approaching traffic at blind corners; dipping beams prevents dazzling vehicles ahead; and enlarging following distance accounts for the compounded risk of wet surfaces and reflective night glare.

Adım Adım Çözüm

1
Assess glare recovery techniques when meeting oncoming full beams.
Identify that looking towards the nearside/left verge protects night vision and prevents driving blindly.
Direct glare severely impairs vision; focusing on the verge maintains lane tracking.
2
Determine observation methods for blind bends in darkness.
Identify that headlight beams projecting onto trees and hedgerows give advance notice of oncoming traffic.
Headlights illuminate elevated vertical structures before vehicles physically round curves.
3
Apply lighting discipline when following other traffic.
Identify that dipped beams are mandatory when trailing another road user.
High beams bounce off rear-view and side mirrors directly into the eyes of the driver ahead.
4
Evaluate combined adverse conditions of darkness, wet surfaces, and artificial lighting.
Identify that extending separation distances counters longer stopping distances and surface reflections.
Water film causes both reduced friction and intense mirror-like glare from overhead lamps.

Anahtar Kavram

Highway Code beam control, dazzle prevention, and hazard anticipation during night driving
Tahmini Süre:1m 30s
Soru 165Soru →

Road users must accurately interpret warning sign symbols to anticipate hazards well in advance. Match each UK warning sign description with the specific hazard condition it alerts drivers to ahead.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

A red triangle containing a black pictogram of a five-bar gate
A red triangle containing a black pictogram of a skidding car with wavy tyre tracks
A red triangle containing a black pictogram of a traffic light housing with three coloured lenses
A red triangle containing a black pictogram of two children walking

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The gate pictogram matches the level crossing with barrier or gate; the skidding car matches a slippery road surface; the traffic light housing matches traffic signals ahead; and the children walking pictogram matches a school crossing patrol or children near the road.
Each standard UK warning sign uses an intuitive silhouette to convey specific road hazards in advance. The gate represents a gated or barriered railway crossing, the skidding car denotes slippery road conditions, the traffic signal indicates upcoming traffic lights, and the children pictogram alerts drivers to school zones or child pedestrian crossings.

Adım Adım Çözüm

1
Identify the primary symbol depicted within each triangular warning sign.
Recognise the five-bar gate, skidding vehicle, traffic signal unit, and children walking symbols.
Triangular signs with red borders provide hazard warnings, with the internal pictogram specifying the nature of the upcoming risk.
2
Correlate each identified pictogram with its designated Highway Code hazard definition.
Link each unique symbol directly to its corresponding hazard description without confusing similar sign categories.
Accurate hazard identification allows drivers adequate time to adjust speed and increase observation.

Anahtar Kavram

Recognition of standard UK triangular warning sign pictograms and their designated road hazards.
Tahmini Süre:45s
Soru 166Soru →

You are driving a car fitted with anti-lock brakes (ABS) down a steep downhill gradient on a wet asphalt road when an unexpected hazard suddenly blocks your lane. How should you apply the footbrake to execute an emergency stop while maintaining vehicle control?

Cevabı ve açıklamayı göster

Cevap: Apply the footbrake firmly and hold it down continuously without releasing pressure until the vehicle has stopped.

Cevap

Apply the footbrake firmly and hold it down continuously without releasing pressure until the vehicle has stopped.
When performing an emergency stop in a vehicle equipped with ABS, the driver should apply immediate, firm, and continuous pressure to the footbrake pedal without releasing it. The ABS system automatically monitors wheel speed and rapidly pulses hydraulic brake pressure to each wheel just below the locking threshold. This ensures the maximum available tyre grip is used for deceleration while keeping the wheels rotating sufficiently to preserve steering control.

Adım Adım Çözüm

1
Identify the vehicle's braking capability and emergency requirements.
The vehicle is equipped with an anti-lock braking system (ABS) and requires maximum deceleration on a low-friction downhill surface.
ABS is engineered to prevent wheels from locking under heavy braking, ensuring the driver maintains steering control.
2
Select the correct driver input for ABS operation.
Depress the brake pedal hard and keep full, steady pressure applied.
Cadence braking (pumping the pedal) is obsolete in ABS-equipped vehicles; manual pumping interferes with the electronic modulation of line pressure.
3
Maintain directional control while stopping.
Steer around hazards if necessary while ABS continues to operate.
Because the tyres do not remain locked, rotational friction is maintained, allowing directional steering input to remain effective.

Anahtar Kavram

Correct emergency braking technique with an anti-lock braking system (ABS)
Tahmini Süre:1m 30s
Soru 167Soru →

You are driving in slow-moving urban traffic and intend to turn left into a side road that crosses a designated cycle lane. You have checked your interior mirror and left exterior mirror. What observation should you make before executing the turn?

Cevabı ve açıklamayı göster

Cevap: Look over your left shoulder to check the blind spot area not covered by your mirrors.

Cevap

Check over your left shoulder to see into the vehicle's blind spot before turning.
Checking over your shoulder allows you to see into the blind spot area beside your vehicle that is not reflected in standard or convex mirrors, ensuring that you do not cut across a cyclist travelling alongside.

Adım Adım Çözüm

1
Assess the limits of mirror coverage
Recognise that interior and exterior mirrors leave blind spots alongside the vehicle where cyclists and pedestrians can be hidden.
Mirrors cannot show the entire area around a vehicle, particularly alongside the rear side windows and pillars.
2
Perform a physical shoulder check into the blind spot
Verify that no cyclists or other road users have pulled up alongside before crossing the cycle lane.
Direct visual checks prevent turning collisions with vulnerable road users travelling alongside.

Anahtar Kavram

Identifying and checking vehicle blind spots during manoeuvres
Tahmini Süre:1m 0s
Soru 168Soru →

On a multi-lane dual carriageway, properly adjusted convex exterior mirrors eliminate vehicle blind spots, making a physical over-the-shoulder check unnecessary prior to changing lanes.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
Evaluating the statement as False is correct because convex mirrors only widen the angle of reflection and cannot eliminate the blind spots alongside the vehicle body; drivers must always perform a direct physical shoulder check before altering lane position.

Adım Adım Çözüm

1
Analyze the optical properties and limitations of convex exterior mirrors.
Convex mirrors produce a wider viewing angle and make vehicles appear smaller and further away, but their reflective field does not wrap around the entire vehicle body.
Understanding mirror geometry identifies the unmonitored areas outside the driver's direct and reflected lines of sight.
2
Determine the zones not covered by interior and exterior mirrors during multi-lane driving.
Vehicles travelling in adjacent lanes slightly behind the driver's peripheral vision remain entirely invisible in all mirrors.
Identifying blind spot locations is necessary to execute safe observational routines before steering or changing speed.
3
Evaluate the procedural requirement for physical shoulder checks under DVSA standards.
A physical glance over the shoulder (lifesaver check) is mandatory to confirm the adjacent lane is clear before changing lanes.
Direct visual checks prevent side-swipe collisions with overtaking traffic, particularly smaller road users such as motorcyclists.

Anahtar Kavram

Convex Mirror Limitations and Mandatory Shoulder Observation
Tahmini Süre:1m 0s
Soru 169Soru →

While driving along an open road after a severe cloudburst, your car encounters pooled water. The engine revs suddenly surge and the steering wheel turns with almost no resistance, having no effect on your direction. What is the safest course of action to regain vehicle control?

Cevabı ve açıklamayı göster

Cevap: Smoothly ease off the accelerator and keep the steering wheel steady until the tyres regain grip

Cevap

Smoothly ease off the accelerator and keep the steering wheel steady until the tyres regain grip.
When a vehicle aquaplanes, water builds up in front of the tyres faster than the tread grooves can evacuate it, causing the tyres to ride on a cushion of water. The correct response is to remove foot pressure from the accelerator pedal smoothly and avoid any harsh steering or braking, allowing the car to decelerate naturally until the tyres cut through the water film and grip the asphalt again.

Adım Adım Çözüm

1
Recognise the symptoms of aquaplaning
Identify that the sudden increase in engine revs and weightless steering indicate tyres are floating on a film of water.
Correct identification prevents panicked and dangerous driver reactions.
2
Avoid sudden braking or steering inputs
The wheels remain pointed in the path of travel without locking up.
Harsh inputs while there is zero tyre-to-road contact lead to uncontrollable skids when traction suddenly returns.
3
Gradually release throttle pressure
The car decelerates gently through natural drag until the tread displaces the water film and reconnects with the road surface.
Allows tyre treads sufficient time to channel water away and re-establish physical grip.

Anahtar Kavram

Aquaplaning Driver Response and Vehicle Control
Tahmini Süre:1m 0s
Soru 170Soru →

When stopped at a school crossing where a School Crossing Patrol is in the carriageway displaying an upright 'STOP - CHILDREN' sign, you are legally permitted to proceed as soon as all children have reached the opposite pavement, even if the patrol officer is still standing in the road.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because the law requires you to remain completely stationary until the School Crossing Patrol lowers their sign and leaves the carriageway. Moving off early is an offence and creates a severe collision risk for straggling children.

Adım Adım Çözüm

1
Identify the legal authority of the School Crossing Patrol
Recognise that a School Crossing Patrol holding a 'STOP - CHILDREN' sign has statutory authority to control road traffic.
Highway Code Rule 210 establishes mandatory compliance with signals given by school crossing patrols.
2
Evaluate driver duties during the crossing procedure
Determine that vehicles must remain stopped for the entire duration the sign is displayed in the carriageway.
Children often run in groups or follow behind without checking, making premature movement hazardous.
3
Determine the exact condition required before moving off
Confirm that the vehicle may only move off once the patrol officer has lowered the sign and fully cleared the carriageway.
Moving off while the patrol remains in the road with the sign raised is illegal and dangerous.

Anahtar Kavram

Driver obligations and legal requirements when encountering a School Crossing Patrol
Tahmini Süre:1m 0s
Soru 171Soru →

When entering a motorway via a slip road, arrange the following steps in the correct chronological order to merge safely and lawfully.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with accelerating along the slip road to match motorway traffic speed, followed by checking mirrors and signalling, performing a right-hand blind spot check while yielding priority to carriageway traffic, and finally merging smoothly into lane 1 and cancelling the indicator.
In accordance with Highway Code Rule 259, safe motorway joining requires building up speed on the slip road, checking mirrors and signalling early, making a quick sideways glance into the blind spot while giving priority to main carriageway traffic, and completing the merge smoothly into lane 1.

Adım Adım Çözüm

1
Accelerate along the slip road
Vehicle speed matches the prevailing speed of traffic on the motorway
Matching traffic speed prevents causing sudden braking or disruption on the main carriageway.
2
Check mirrors and signal right
Awareness of lane 1 traffic is established and intention to merge is communicated
Allows surrounding drivers on the motorway to anticipate your approach.
3
Check blind spot and observe priority
Confirmation that the intended gap is clear and carriageway priority is respected
Highway Code Rule 259 states traffic joining from a slip road must give priority to traffic already on the main carriageway.
4
Merge into lane 1 and cancel indicator
Safe positioning in lane 1 without misleading signals
Completes the manoeuvre safely and avoids confusing following drivers with a continuous signal.

Anahtar Kavram

Highway Code Rule 259 procedure for joining the motorway safely from a slip road
Tahmini Süre:45s
Soru 172Soru →

While navigating an unlit single-carriageway route during a cloudburst, a build-up of surface water causes your tyres to lose grip and float. In what chronological order should you carry out the following actions to safely regain vehicle control?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

1. Keep the steering wheel straight and steady without making abrupt directional changes. 2. Ease your foot smoothly off the accelerator pedal without touching the brake. 3. Allow vehicle momentum to drop until the tyre treads disperse the standing water and contact the road surface. 4. Confirm that normal steering resistance has returned before making any necessary course adjustments.
When a vehicle aquaplanes, water builds between the tyres and road, causing steering to feel light. The correct procedure is to first maintain a straight, steady steering angle to prevent a spin. Next, smoothly ease off the accelerator to let engine drag reduce speed without locking the wheels. Then, allow the lower speed to let tyre treads disperse the water layer. Finally, verify that steering weight and feel have returned before resuming normal driving manoeuvres.

Adım Adım Çözüm

1
Maintain a steady, straight steering angle immediately upon sensing aquaplaning.
Prevents severe yaw or violent directional snatching when tyre grip re-engages.
Turning wheels while floating on water creates an uncontrolled skid the moment the tyres touch tarmac.
2
Gradually lift off the accelerator pedal while avoiding the brake pedal.
Reduces forward speed safely through natural engine braking.
Sudden hard braking on water causes wheels to lock instantly, increasing loss of control.
3
Wait for tyre tread channels to clear standing water as vehicle speed decreases.
The water wedge dissipates and tyre rubber re-establishes contact with the road.
Tyre tread requires a lower speed threshold to effectively evacuate high volumes of standing water.
4
Feel for the return of steering wheel weight and responsiveness before applying further control inputs.
Confirms vehicle has successfully recovered full traction.
Aquaplaning creates light steering; resistance indicates restored grip and safe controllability.

Anahtar Kavram

Driver recovery sequence during aquaplaning
Tahmini Süre:1m 0s
Soru 173Soru →

You are driving behind a long articulated lorry that is approaching a left turn into a narrow side road. The lorry signals left but moves towards the right-hand side of the lane before turning. What should you do?

Cevabı ve açıklamayı göster

Cevap: Stay well back behind the lorry and wait for it to complete the turn

Cevap

Stay well back behind the lorry and wait for it to complete the turn.
Long vehicles such as articulated lorries require additional road space to manoeuvre around tight corners. A driver of a long vehicle will often swing out towards the right before turning left to prevent the rear wheels from mounting the kerb. You should remain well behind the vehicle, giving it plenty of space and time to finish the manoeuvre.

Adım Adım Çözüm

1
Recognise the turning requirements and swept path of long vehicles.
Understand that the lorry is swinging out to the right in order to create sufficient turning room for its rear trailer.
Long vehicles need extra space so their rear wheels do not mount the pavement or strike street furniture.
2
Maintain safe road positioning by staying well back in your lane.
Keep your vehicle visible in the lorry's mirrors and completely clear of the turning arc.
Leaving ample clearance prevents entering the driver's blind spot and avoids collision with the swinging trailer.

Anahtar Kavram

Lane positioning and clearance when following long turning vehicles
Tahmini Süre:45s
Soru 174Soru →

Drivers encounter various light signals and markers at UK pedestrian crossings. Match each crossing signal or indicator to the corresponding driver rule or meaning.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Flashing amber Belisha beacon
Flashing amber traffic light signal
Steady amber traffic light signal
Combined green pedestrian and bicycle symbols

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Flashing amber Belisha beacon matches the Zebra crossing rule; Flashing amber traffic light signal matches the Pelican crossing give-way rule; Steady amber traffic light signal matches the standard stop rule; Combined green pedestrian and bicycle symbols match the Toucan crossing shared-use rule.
Each pedestrian crossing type in the UK uses specific visual markers and signal sequences defined in Highway Code Rules 195 to 199. Belisha beacons highlight Zebra crossings; the flashing amber phase is exclusive to Pelican crossings allowing cautious progress when clear; steady amber signals mandate stopping unless unsafe; and dual green figures define Toucan crossings for shared pedestrian and cycle use.

Adım Adım Çözüm

1
Identify the distinct crossing types associated with each signal indicator.
Belisha beacons indicate Zebra crossings; flashing amber lights appear on Pelican crossings; steady amber lights appear on standard light sequences; dual green figures appear on Toucan crossings.
Different crossing designs use specific visual indicators to control traffic flow and pedestrian priority.
2
Apply the specific Highway Code rules governing driver actions for each signal.
Belisha beacon requires yielding to pedestrians on the crossing; flashing amber at a Pelican permits moving if clear; steady amber demands stopping if safe; dual green figures allow mounted cyclists alongside pedestrians.
Understanding exact legal obligations prevents collisions and ensures the safety of vulnerable road users.

Anahtar Kavram

Operating rules and signal indications across UK pedestrian crossings
Tahmini Süre:1m 15s
Soru 175Soru →

You are driving down a residential street and notice a child riding a scooter along the pavement. Further ahead, a large delivery van is parked across the pavement, completely obstructing their route. What should you do as you approach?

Cevabı ve açıklamayı göster

Cevap: Slow down and be prepared to stop, anticipating that the child may swerve into the carriageway.

Cevap

Slow down and be prepared to stop, anticipating that the child may swerve into the carriageway.
Children are vulnerable road users who often behave unpredictably. When an obstruction blocks the pavement, a child on a scooter or bicycle is likely to divert straight onto the road without looking. The safest response is to slow down, leave plenty of room, and be prepared to stop.

Adım Adım Çözüm

1
Identify the vulnerable road user and the physical obstruction along their path.
Recognise that the delivery van blocks the pavement, creating a developing hazard where the child may suddenly divert into the carriageway.
Children often lack mature hazard awareness and may enter the carriageway without stopping to check for oncoming traffic.
2
Adjust your driving speed and increase anticipation.
Reduce vehicle speed significantly and keep your foot covering the brake pedal.
Lowering speed dramatically shortens stopping distance and provides adequate time to stop smoothly if the child swerves into the road.

Anahtar Kavram

Anticipating unpredictable behaviour from children near road and pavement obstructions
Soru 176Soru →

You are driving along a narrow country road and approach two cyclists riding side by side just before a sharp blind bend. Which TWO actions should you take to manage this situation safely?

Geçerli olan tümünü seçin

Cevabı ve açıklamayı göster

Cevap: Hold back behind the cyclists until you have passed the bend and have a clear view ahead; Allow at least 1.5 metres (5 feet) of clearance when overtaking once it is safe

Cevap

Hold back behind the cyclists until you have passed the bend and have a clear view ahead, and allow at least 1.5 metres (5 feet) of clearance when overtaking once it is safe.
Cyclists are legally entitled to ride two abreast, which can improve their visibility and safety in groups or on narrow roads. Drivers must wait patiently behind them when visibility is restricted, such as before a blind bend. When an overtake is safe, drivers must give cyclists at least 1.5 metres of clearance at speeds up to 30 mph, and more space at higher speeds.

Adım Adım Çözüm

1
Assess the upcoming road geometry and potential hidden hazards
Identify that the sharp bend prevents a clear view of oncoming traffic, making immediate overtaking unsafe.
Overtaking without a clear view ahead risks a head-on collision with oncoming vehicles.
2
Maintain a safe following distance behind the cyclists until visibility improves
Keep a steady, calm speed behind both riders without pressuring or startling them.
Cyclists are permitted to ride two abreast, and drivers must wait patiently for a safe overtaking opportunity.
3
Execute the overtake only when the road is clear, providing ample lateral clearance
Pass the riders with at least 1.5 metres of clearance.
Compliance with Highway Code Rule 163 protects vulnerable road users from sudden gusts of wind, balance adjustments, or surface hazards.

Anahtar Kavram

Safe following, patience, and overtaking clearance for cyclists on rural roads
Tahmini Süre:1m 0s
Soru 177Soru →

Under UK road traffic law and road safety guidelines regarding alcohol and drugs, match each driver scenario or legal condition with its correct physiological effect or legal outcome.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Combining a low quantity of alcohol with prescribed sedative medication
Refusing without reasonable excuse to provide an evidential specimen of breath or blood at a police station
Driving above the specified blood limit for a prescribed controlled medicine while strictly following clinical instructions
Taking an over-the-counter medicine that carries a label warning against operating heavy machinery

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Combining alcohol with sedatives matches with multiplied synergistic impairment; refusing an evidential specimen matches with penalties equivalent to driving over the legal limit; driving with prescribed controlled medication taken properly matches with statutory medical defence (if unimpaired); taking over-the-counter medication with warnings matches with sole driver responsibility to refrain from driving if drowsy.
Each scenario correctly aligns with UK statutory provisions and physiological science: alcohol combined with sedatives causes synergistic impairment; refusing an evidential specimen carries identical sanctions to exceeding the alcohol limit; prescribed controlled drugs are protected by medical defence only when taken correctly and without causing impairment; and over-the-counter medications place direct accountability on the driver to evaluate alertness.

Adım Adım Çözüm

1
Analyze the physiological effect of drug-alcohol interactions
Combining alcohol and sedatives produces multiplied (synergistic) depression of the nervous system.
Alcohol interacts dynamically with medicines to magnify drowsiness and slow hazard perception.
2
Evaluate the statutory consequences of non-compliance with police testing procedures
Refusing an evidential specimen incurs penalties matching a drink-driving conviction.
Road traffic legislation ensures drivers cannot evade legal sanctions simply by refusing to provide a sample.
3
Differentiate between illegal drug limits and the medical defence clause for prescription medication
A valid prescription and adherence to dosage establishes a legal defence against the specified threshold offence, provided driving remains safe and unimpaired.
The law protects patients taking legitimate therapeutic medication unless their actual driving performance is compromised.
4
Determine driver duty regarding over-the-counter remedies with warning labels
The driver holds personal legal responsibility not to operate a vehicle if affected by side effects.
Non-prescription status does not exempt a motorist from prosecution for driving while unfit through drugs.

Anahtar Kavram

UK legal frameworks and physiological impacts concerning alcohol consumption, controlled prescription drugs, and over-the-counter medications.
Soru 178Soru →

When driving on roads affected by standing water and surface spray, what is the most effective action to prevent your vehicle from aquaplaning?

Cevabı ve açıklamayı göster

Cevap: Reduce your road speed and drive smoothly before encountering pooled water

Cevap

Reduce your road speed and drive smoothly before encountering pooled water
Reducing road speed before meeting standing water allows the tyre treads sufficient time to channel water away from the contact patch, maintaining positive physical contact with the tarmac and preventing the car from riding on a cushion of water.

Adım Adım Çözüm

1
Assess wet road conditions and identify hazards such as surface spray and standing water.
The driver recognises that standing water creates a barrier between tyres and the road surface.
Anticipating surface water early allows proactive adjustment of speed rather than reactive emergency manoeuvres.
2
Adjust vehicle speed downwards in a controlled manner before entering areas with standing water.
Tyre tread grooves have adequate time to disperse surface water effectively.
Aquaplaning occurs when vehicle speed exceeds the rate at which tyre tread can channel water away, causing the tyres to ride on top of a water film.

Anahtar Kavram

Prevention of aquaplaning through proactive speed reduction and smooth vehicle handling
Tahmini Süre:1m 0s
Soru 179Soru →

You are navigating a wet, single-carriageway road in a residential area. Up ahead, a large delivery van is parked on the opposite side of the road. On your side, just ahead of a parked car, several young children are playing with a ball near the edge of the pavement. The vehicle in front of you is braking gently. Which of the following is the most comprehensive and safest defensive driving response?

Cevabı ve açıklamayı göster

Cevap: Increase your following distance to at least four seconds, scan the spaces around the parked cars, and reduce your speed in anticipation of a child entering the road.

Cevap

Increase your following distance to at least four seconds, scan the spaces around the parked cars, and reduce your speed in anticipation of a child entering the road.
The correct response effectively manages multiple hazards simultaneously. It accounts for the wet road surface by increasing the following distance to four seconds, addresses the unpredictability of children playing near a road, and mitigates the danger of obscured sightlines caused by the parked vehicles.

Adım Adım Çözüm

1
Analyze the road conditions.
The road is wet, meaning normal stopping distances are doubled.
Weather conditions dictate fundamental safety margins, requiring a four-second gap instead of two.
2
Identify the vulnerable road users.
Children are playing with a ball near the pavement edge.
Children can be highly unpredictable and may suddenly run into the carriageway without checking for traffic.
3
Evaluate the static hazards.
Parked cars on both sides obscure visibility.
Parked vehicles hide developing hazards and provide blind spots from which pedestrians can unexpectedly emerge.
4
Synthesize the safest response.
Combine increased following distance, reduced speed, and active scanning.
This comprehensively mitigates all identified risks in the complex scenario.

Anahtar Kavram

Synthesizing hazard awareness around vulnerable road users with appropriate weather-related safety margins.
Soru 180Soru →

Under the Highway Code, which of the following road users is strictly prohibited from using a motorway?

Cevabı ve açıklamayı göster

Cevap: A cyclist riding a pedal bicycle

Cevap

A cyclist riding a pedal bicycle is strictly prohibited from using a motorway.
Under Highway Code Rule 253, motorways must not be used by pedestrians, cyclists, horse riders, certain slow-moving agricultural vehicles, and motorcycles under 50 cc. Pedal bicycles cannot safely integrate with high-speed traffic and are therefore completely prohibited.

Adım Adım Çözüm

1
Review the restrictions set out in Highway Code Rule 253 regarding prohibited motorway road users.
Rule 253 identifies pedestrians, cyclists, horse riders, motorcycles under 50 cc, and certain slow-moving agricultural vehicles as prohibited.
Motorways are high-speed environments designed exclusively for specific classes of motor vehicles capable of maintaining appropriate speeds safely.
2
Evaluate the eligibility of each road user listed in the options.
Towing vehicles, dual-control supervised learner drivers, and large goods vehicles are all permitted with conditions, whereas pedal cycles are completely banned.
This isolates the only road user category that is categorically prohibited under the regulations.

Anahtar Kavram

Prohibited vehicles and road users on motorways under Highway Code Rule 253
Tahmini Süre:45s
ÖncekiSayfa 9 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin