Examkin

Tüm alıştırma soruları

1884 soru

Tüm türler1,884Çoktan seçmeli962Çoklu seçim84Doğru / Yanlış379Sayısal32Eşleştirme249Sıralama178
Soru 1501Soru →

At a traffic light junction in the UK, a red light showing together with an amber light means that you may proceed if the road ahead is clear.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False. Red and amber shown together means stop and wait; you must not proceed until the green light illuminates.
According to the Highway Code, red and amber showing together means stop. Although it indicates that green will follow shortly, you must not cross the stop line or move forward until the green light shows.

Adım Adım Çözüm

1
Identify the traffic light phase described in the statement.
The traffic light is displaying red and amber simultaneously.
Understanding the UK 4-phase traffic light sequence is required to determine the correct driver action.
2
Apply Highway Code rules to the red and amber signal phase.
Red and amber warns that the lights are about to change to green, but it is legally a stop signal.
Under UK traffic law, you must not pass the stop line or start off until green shows.
3
Evaluate the statement's accuracy.
The claim that drivers may proceed on red and amber when clear is false.
Permission to proceed is granted only when green appears and the junction is clear.

Anahtar Kavram

UK traffic light phases and the legal requirement to stop on red and amber
Tahmini Süre:30s
Soru 1502Soru →

You are driving down a hill on a wet road and approach a Zebra crossing where pedestrians are waiting at the kerb. What is the correct sequence of actions you should take from your initial approach until you safely drive on?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence begins with checking mirrors and braking early before the zigzag markings, followed by stopping before the broken give-way line, securing the vehicle with the parking brake without beckoning pedestrians, and finally completing all-round observation checks before moving off once the pedestrians are safely on the pavement.
The correct procedure follows the standard Mirror-Signal-Manoeuvre routine adapted for pedestrian crossings: early speed management before the zigzag area, a definitive stop behind the give-way marking, securing the vehicle while giving precedence without hazardous beckoning gestures, and conducting comprehensive safety checks after pedestrians have fully cleared the roadway.

Adım Adım Çözüm

1
Check rear-view and side mirrors, then begin progressive braking well before the zigzag road markings.
Following drivers are alerted in good time, and speed is safely shed on the slippery downhill slope.
Wet roads double braking distances, requiring early planning before reaching the hazard zone.
2
Stop smoothly and squarely behind the broken give-way line.
The vehicle is positioned legally without encroaching on the pedestrian path.
Rule 195 of the Highway Code requires drivers to give way to pedestrians on or waiting at a Zebra crossing.
3
Apply the parking brake (handbrake) and wait patiently without gesturing, flashing headlights, or sounding the horn.
The vehicle is safely anchored against rolling, and pedestrians can judge their own crossing safety without false reassurance.
Beckoning pedestrians across can lure them directly into the path of unseen vehicles or cyclists passing in other lanes.
4
Confirm all pedestrians have fully mounted the opposite kerb, perform 360-degree mirror and blind-spot checks, and drive on.
The vehicle departs safely without endangering pedestrians who might turn back or overtaking two-wheelers.
A crossing remains active until pedestrians are safely off the carriageway, and pre-departure checks ensure no new hazards exist.

Anahtar Kavram

Highway Code procedures for approaching, giving precedence at, and clearing a Zebra pedestrian crossing under adverse road conditions.
Tahmini Süre:1m 30s
Soru 1503Soru →

You are waiting at a pelican crossing. The red signal changes to flashing amber while pedestrians are still on the crossing. What action must you take?

Cevabı ve açıklamayı göster

Cevap: Wait for the pedestrians to finish crossing before you proceed

Cevap

Wait for the pedestrians to finish crossing before proceeding
Under Rule 196 of the Highway Code, a flashing amber signal at a pelican crossing requires drivers to give way to any pedestrians already crossing. Drivers may only proceed once the crossing is completely clear.

Adım Adım Çözüm

1
Identify the type of pedestrian crossing and the active signal phase
The crossing is a pelican crossing showing a flashing amber light.
Pelican crossings feature a flashing amber phase in their sequence, unlike puffin or toucan crossings.
2
Apply the specific Highway Code rule for flashing amber signals
Drivers must give way to pedestrians who are already on the crossing.
The flashing amber signal grants pedestrians priority while allowing drivers to proceed once the crossing is fully cleared.
3
Determine the required driver action based on current hazards
Remain stationary and give way until all pedestrians have safely reached the pavement, then move off.
Moving off while pedestrians are still crossing creates a serious collision hazard and breaches Highway Code rules.

Anahtar Kavram

Driver priority and rules at pelican crossings during the flashing amber phase
Tahmini Süre:45s
Soru 1504Soru →

When driving behind a motorcyclist approaching traffic calming features such as speed cushions, you should maintain a greater following distance because the rider may adjust their road position towards the middle of the carriageway to negotiate the feature safely.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True. Drivers must allow motorcyclists extra separation distance when approaching traffic calming features because riders often need to alter their positioning across the lane to negotiate speed cushions safely.
The statement is true because motorcyclists often need to steer towards the centre of the carriageway or between cushions to avoid the steep ramps and edges of speed cushions. Drivers following behind must anticipate these line changes and keep a larger safety cushion.

Adım Adım Çözüm

1
Assess the stability and handling requirements of a motorcyclist approaching road humps and speed cushions.
Motorcycles are single-track vehicles that can easily lose balance or sustain damage if they hit road surface irregularities at inappropriate angles.
Understanding two-wheeled vehicle dynamics is necessary to predict rider behaviour.
2
Determine the necessary driver response regarding following distance and hazard anticipation.
The driver must anticipate lateral movement across the lane and sudden deceleration, requiring an increased following buffer.
Maintaining extra distance prevents putting pressure on the rider and eliminates collision risk.
3
Confirm whether the statement accurately reflects Highway Code safety guidance for vulnerable road users.
The statement is confirmed as true.
The guidance matches safe driving practice for following vulnerable road users at traffic calming measures.

Anahtar Kavram

Anticipating motorcyclist positioning changes and increasing following distance at road features and traffic calming obstacles.
Tahmini Süre:45s
Soru 1505Soru →

At a junction controlled by traffic lights, an illuminated green filter arrow permits you to proceed in the direction indicated by the arrow, regardless of whether the main traffic light is showing red, provided the way is clear.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True: An illuminated green filter arrow permits travel in the indicated direction even if other signals on the head show red, provided the route is clear.
According to UK traffic signal regulations and The Highway Code, an illuminated green filter arrow gives explicit permission to proceed in the direction of the arrow, regardless of whether a red signal is illuminated for other lanes or straight-ahead traffic. Drivers must still check that their exit is clear and give way to pedestrians who are crossing.

Adım Adım Çözüm

1
Identify the signal components displayed at the junction
A main red light is visible alongside an illuminated green filter arrow.
Traffic signal heads often combine general control lights with dedicated phase arrows for specific lanes or movements.
2
Apply Highway Code rules regarding green filter arrows
The green filter arrow permits movement solely in the direction it points, overriding the restrictive status of the main red light for that specific lane.
Rule 175 and the Light Signals Controlling Traffic section of The Highway Code state that a green arrow indicates you may go in that direction whatever other lights may be showing.
3
Evaluate the condition regarding road clearance and pedestrian priority
Proceeding is permitted provided the way is clear and pedestrians are given priority.
All permissive green signals require the driver to ensure the junction is clear before proceeding.

Anahtar Kavram

Green Filter Arrow Priority and Meaning at Traffic Signals
Tahmini Süre:45s
Soru 1506Soru →

At a roundabout, you notice a cyclist in the left-hand lane indicating right to continue around the junction. How should you respond?

Cevabı ve açıklamayı göster

Cevap: Give them plenty of room and allow them to complete their manoeuvre

Cevap

Give the cyclist plenty of room and allow them to complete their manoeuvre.
According to Highway Code Rule 187, cyclists and horse riders may stay in the left-hand lane of a roundabout and signal right to show they are continuing around. Drivers should stay back, be patient, and give them plenty of room.

Adım Adım Çözüm

1
Identify the vulnerable road user and their signalling intent.
Recognise that the cyclist is indicating right while riding in the left-hand lane.
Cyclists often travel in the outer lane of roundabouts to keep themselves safer from circulating traffic.
2
Apply Highway Code Rule 187 regarding roundabouts.
Maintain a safe following distance and do not attempt to squeeze past or intimidate the rider.
Drivers must give cyclists and horse riders extra time, space, and consideration when they navigate roundabouts.

Anahtar Kavram

Vulnerable road users, such as cyclists and horse riders, may remain in the left-hand lane while turning right at a roundabout for their own safety.
Tahmini Süre:45s
Soru 1507Soru →

When accelerating along an entry slip road to join a motorway, what is the main purpose of glancing over your right shoulder before merging?

Cevabı ve açıklamayı göster

Cevap: To check for vehicles travelling in the blind spots not covered by your mirrors

Cevap

To check for vehicles travelling in the blind spots not covered by your mirrors
Before merging onto the motorway from the slip road, checking your mirrors alone is not sufficient because other vehicles may be travelling in your vehicle's blind spots. A quick shoulder check to the right confirms that the space you intend to merge into is clear and safe.

Adım Adım Çözüm

1
Assess the motorway traffic flow while accelerating along the slip road.
You identify an appropriate gap in the left-hand lane of the main carriageway.
Matching the speed of traffic in lane 1 allows for a smooth, safe integration.
2
Perform a rapid sideways check over your right shoulder just before merging.
Any vehicles hidden from the view of your interior and exterior mirrors are spotted.
Mirrors have blind zones where nearby vehicles can remain invisible until checked directly.

Anahtar Kavram

Observation and blind spot checks when joining a motorway
Tahmini Süre:45s
Soru 1508Soru →

According to the UK Highway Code, when driving in wet conditions on a high-speed road, the minimum safe following distance behind the vehicle in front should be increased from two seconds to at least four seconds.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The statement is correct because Rule 126 of the UK Highway Code specifies that drivers should leave at least a two-second gap on roads carrying faster-moving traffic in dry conditions, and this safety margin must be at least doubled to four seconds on wet roads where braking distances increase.

Adım Adım Çözüm

1
Recall the baseline time gap rule for vehicles traveling on high-speed roads in dry weather.
The UK Highway Code specifies a minimum time gap of two seconds (the two-second rule) on dry roads carrying faster-moving traffic.
A two-second gap provides sufficient thinking and braking margin under normal, dry asphalt conditions.
2
Apply the weather adjustment factor for wet road surfaces.
Stopping distances roughly double in wet weather due to reduced tyre friction, requiring the separation time gap to double from two seconds to at least four seconds.
Water reduces tyre adhesion and increases braking distance, necessitating an extended safety buffer.
3
Assess whether the statement matches the official UK Highway Code rule.
The statement accurately describes increasing the following distance from two seconds to at least four seconds.
The rule explicitly mandates doubling the gap in wet conditions.

Anahtar Kavram

Application of the two-second following distance rule and wet weather multipliers under the UK Highway Code
Tahmini Süre:45s
Soru 1509Soru →

When parking your vehicle on a two-way street at night, which rule must you follow unless you are parked in a recognised parking space?

Cevabı ve açıklamayı göster

Cevap: Park facing in the same direction as the traffic flow

Cevap

Park facing in the same direction as the traffic flow
According to Highway Code Rule 248, you must not park on a road at night facing against the direction of traffic flow unless in a recognised parking space. Parking in the direction of traffic ensures that your vehicle's red rear reflectors catch the headlights of approaching vehicles, alerting other road users to your stationary car.

Adım Adım Çözüm

1
Identify the statutory Highway Code requirement for parking on a two-way road at night.
Highway Code Rule 248 mandates that vehicles parked at night on a two-way road must face in the direction of traffic flow unless in a designated parking bay.
Road safety rules require parked vehicles to remain clearly visible to traffic approaching from behind in hours of darkness.
2
Assess the safety mechanism provided by this vehicle orientation.
Facing with the flow of traffic ensures the red rear reflectors face approaching traffic on that side of the carriageway.
Red rear reflectors passively reflect the headlamps of oncoming cars, warning drivers of the stationary obstruction well in advance.

Anahtar Kavram

Highway Code Rule 248: Legal requirements for vehicle orientation when parking on a road at night.
Tahmini Süre:45s
Soru 1510Soru →

You are waiting at a Toucan crossing. The traffic lights turn green, but a cyclist and a pedestrian are still crossing in front of you. What must you do?

Cevabı ve açıklamayı göster

Cevap: Wait behind the stop line and allow both the cyclist and the pedestrian to finish crossing safely.

Cevap

Wait behind the stop line and allow both the cyclist and the pedestrian to finish crossing safely.
Even when the traffic signal turns green, drivers must give way to any pedestrians or cyclists who are already on the crossing. You should wait patiently until they have safely reached the pavement before you move off.

Adım Adım Çözüm

1
Observe the green traffic signal and evaluate the crossing area ahead.
Recognise that vulnerable road users (a cyclist and a pedestrian) are currently occupying the carriageway.
A green traffic light gives permission to proceed only if the way ahead is completely clear.
2
Remain stationary behind the stop line without pressuring the crossing users.
The pedestrian and cyclist cross the road without panic or danger.
The Highway Code requires drivers to give way to anyone already on a controlled crossing when the lights change.
3
Check mirrors and blind spots once the crossing is clear before moving off smoothly.
Safe progression past the crossing without endangering any other road users.
Comprehensive observation ensures no additional cyclists or pedestrians have entered your path.

Anahtar Kavram

Driver priority and obligations at light-controlled crossings when road users are still crossing.
Tahmini Süre:1m 0s
Soru 1511Soru →

During peak traffic hours on an active traffic management section of motorway, an overhead gantry displays a speed limit of 60 mph enclosed in a red circle directly above the hard shoulder. What does this signal require you to do?

Cevabı ve açıklamayı göster

Cevap: Drive in the hard shoulder as a normal running lane while staying at or below the displayed speed limit

Cevap

Drive in the hard shoulder as a normal running lane while staying at or below the displayed speed limit
On smart motorways with Active Traffic Management (dynamic hard shoulders), a speed limit displayed inside a red circle above the hard shoulder means it is open to all traffic as an active running lane. Drivers must use normal lane discipline and must not exceed the mandatory speed limit shown.

Adım Adım Çözüm

1
Identify the gantry signal shown above the hard shoulder
Recognise that a speed limit in a red circle over the hard shoulder opens it as an active running lane
On smart motorways with dynamic hard shoulders, a displayed speed limit indicates the lane is operational for standard driving.
2
Determine the legal status of the speed limit shown
Identify that a circular red ring signifies a mandatory legal maximum speed limit
Circular signs with red borders give mandatory instructions that drivers must legally obey.

Anahtar Kavram

Dynamic hard shoulder operation and mandatory variable speed limits on smart motorways
Tahmini Süre:1m 0s
Soru 1512Soru →

You are driving behind a motorcyclist on a wet road. Why might the rider steer around metal drain covers and painted road markings?

Cevabı ve açıklamayı göster

Cevap: To prevent their tyres from losing grip on smooth, slippery surfaces

Cevap

Motorcyclists avoid metal drain covers and painted road markings in the wet because these smooth surfaces become extremely slippery and can cause a sudden loss of traction.
In wet weather, metal surfaces such as drain covers, inspection hatches, and painted road markings become exceptionally slippery. Because motorcycles balance on two wheels with a relatively small contact patch, running over these surfaces can cause the tyres to lose grip instantly, leading to a slide or fall. Drivers following a motorcyclist in the wet must stay alert and leave extra following distance to allow the rider room to safely manoeuvre around these hazards.

Adım Adım Çözüm

1
Identify the vulnerable road user and environmental conditions described in the scenario.
A motorcyclist is travelling on a wet road surface where metal drain covers and painted markings are present.
Two-wheeled vehicles rely on a narrow tyre contact patch for balance and traction, making them especially sensitive to road surface changes.
2
Analyse how water alters the friction of smooth road features compared to standard asphalt.
Smooth surfaces like metal covers and painted lines lose almost all grip when wet, creating a high risk of slipping.
Understanding why riders alter their road position allows following drivers to anticipate lateral movements and keep a safe separation distance.

Anahtar Kavram

Motorcycle stability and hazard avoidance on wet or low-grip road surfaces
Tahmini Süre:1m 0s
Soru 1513Soru →

You are approaching a junction controlled by traffic lights. The main signal is showing red, but a green filter arrow pointing to the left is illuminated. What should you do if you want to turn left?

Cevabı ve açıklamayı göster

Cevap: Proceed in the direction of the arrow if the way is clear

Cevap

Proceed in the direction of the arrow if the way is clear
According to the Highway Code, when a green filter arrow is illuminated alongside a red light, you may proceed in the direction indicated by the arrow if your lane and the junction are clear.

Adım Adım Çözüm

1
Identify the active signals on the traffic light assembly
Observe that the main signal shows red, but the dedicated left-turn green filter arrow is illuminated.
Traffic light junctions frequently control individual lane movements with dedicated filter arrows.
2
Apply the UK Highway Code rule for green filter arrows
Establish that turning left is permitted without waiting for the main circular green light.
A green filter arrow gives legal permission to move in the indicated direction provided the way is clear and safe.

Anahtar Kavram

An illuminated green filter arrow allows traffic to proceed in the indicated direction regardless of other lights showing.
Tahmini Süre:45s
Soru 1514Soru →

Accelerating to a higher road speed when travelling across open, wind-swept areas improves vehicle stability because increased forward momentum prevents the car from being pushed sideways by sudden gusts.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False
The statement is false because increasing road speed in severe crosswinds severely compromises vehicle stability. Higher speeds amplify aerodynamic buffeting, decrease tyre grip margins, and reduce the time the driver has to react and make smooth steering corrections when hit by unexpected gusts.

Adım Adım Çözüm

1
Evaluate the relationship between vehicle speed and aerodynamic forces in strong winds.
Higher speed increases aerodynamic turbulence and amplifies the lateral force exerted by crosswinds.
Vehicle handling in windy conditions is governed by aerodynamic effects that scale non-linearly with road speed.
2
Assess the effect of road speed on driver reaction time and lateral deviation.
Travelling faster dramatically shortens the time available to detect and smoothly correct course deviations.
Maintaining vehicle control during sudden buffeting requires moderate speeds and measured steering corrections rather than abrupt inputs.

Anahtar Kavram

Adjusting speed and handling to maintain directional stability in strong crosswinds
Tahmini Süre:45s
Soru 1515Soru →

Regulatory signs convey mandatory instructions and strict prohibitions. Match each specific regulatory sign description with the exact legal restriction and exemptions it imposes on road users according to the Highway Code.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Solid blue circle with a red border and a red cross
Solid blue circle with a red border and a single red diagonal line
Red circle with a white background containing a car above a solo motorcycle
Red circle with a white background containing no internal symbols or text

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

The Clearway sign (red cross) pairs with the absolute stopping ban. The No Waiting sign (single slash) pairs with the parking ban that allows passenger boarding. The sign showing a car and motorcycle pairs with the ban on motor vehicles only (allowing ridden bikes). The completely blank red circle pairs with the complete ban on all vehicular traffic (requiring cyclists to walk).
Each regulatory sign imposes a very specific legal restriction. The cross indicates an absolute stop prohibition. The single slash indicates a waiting prohibition that legally exempts passenger boarding. The car/motorcycle graphic limits the ban to motor vehicles, leaving non-motorised transport unaffected. The blank ring bans all vehicles, classifying ridden bicycles as vehicles that must be pushed instead.

Adım Adım Çözüm

1
Analyze the blue circular signs with red borders.
Identify that the cross signifies 'No Stopping' (Clearway), while the single slash signifies 'No Waiting'.
These signs are often confused, but legally, No Stopping is absolute, whereas No Waiting permits brief passenger boarding.
2
Analyze the red circular signs with white backgrounds.
Identify that the sign featuring the car and motorcycle specifically targets motor vehicles, whereas the completely blank sign targets all vehicles.
This distinction determines which restrictions apply to non-motorised traffic, such as ridden pedal cycles.
3
Match each sign to its precise legal exemption.
No Waiting allows boarding; No Motor Vehicles allows ridden bicycles; No Vehicles requires cyclists to dismount; Clearway allows no stopping at all.
To complete the correct pairings based strictly on Highway Code statutory regulations.

Anahtar Kavram

Statutory regulatory sign prohibitions and their specific legal exemptions.
Soru 1516Soru →

When planning to turn right from a minor road at a T-junction onto a busy main road, what is the correct order of actions according to the Mirrors-Signal-Manoeuvre (MSM) routine?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence follows the standard Mirrors-Signal-Manoeuvre routine: check interior and right mirrors, signal right, adjust position and speed towards the centre line, check right, left, and right at the give-way line, and emerge safely when both lanes are clear.
According to the UK Highway Code and standard driving technique, a driver must follow the Mirrors-Signal-Manoeuvre routine. You first check the rear and right mirrors to confirm it is safe to signal. You then signal right, adjust your speed and vehicle position towards the centre line, perform thorough observations in both directions at the give-way line, and finally complete the turn when both directions are clear.

Adım Adım Çözüm

1
Check rear-view and right exterior mirrors.
Full awareness of traffic approaching from behind and alongside.
Mirrors must always be checked before giving signals or altering the vehicle's direction or speed.
2
Signal right in good time.
Clear warning given to following, approaching, and oncoming road users.
Signalling early allows other road users to anticipate your deceleration and change of position.
3
Brake progressively and position just left of the dividing centre line.
Safe approach speed and optimal lane positioning for a right turn.
Proper positioning communicates your intent clearly and prevents cutting corners on entry.
4
Arrive at the give-way line and look right, left, and right again.
Thorough assessment of traffic on the priority road.
Traffic from the right is closest and has priority, followed by traffic crossing from the left.
5
Accelerate smoothly into the correct lane.
Safe entry and integration into the main flow of traffic.
Turning right crosses both lanes, requiring a sufficient gap in both directions before moving.

Anahtar Kavram

Application of the Mirrors-Signal-Manoeuvre (MSM) routine and Position-Speed-Look (PSL) phase when emerging right at a T-junction.
Tahmini Süre:1m 0s
Soru 1517Soru →

When driving a standard passenger car at a mini-roundabout, you are permitted to drive straight over the central painted markings if the junction is clear of other traffic.

Cevabı ve açıklamayı göster

Cevap: False

Cevap

The statement is False.
According to Highway Code Rule 188, all vehicles must pass around the central markings of a mini-roundabout. Only large vehicles that are physically unable to maneuver around the circle are permitted to drive over it.

Adım Adım Çözüm

1
Identify the vehicle type and junction layout
The scenario involves a standard passenger car navigating a mini-roundabout.
Mini-roundabouts have specific mandatory requirements regarding how vehicles interact with the central markings.
2
Apply the relevant UK Highway Code regulation
Highway Code Rule 188 states that all vehicles must pass round the central markings, exempting only large vehicles that are physically incapable of doing so.
Standard passenger cars can easily maneuver around the central island without driving over it, making driving across the markings unlawful.

Anahtar Kavram

Mini-roundabout central marking navigation rules
Tahmini Süre:30s
Soru 1518Soru →

An articulated large goods vehicle (LGV) approaching a narrow left-hand turn may need to swing out towards the centre or right side of the road before executing the manoeuvre to prevent its trailer wheels from mounting the kerb.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True — Large articulated vehicles must often swing out to the right before turning left to allow sufficient clearance for the trailer wheels.
Articulated large goods vehicles require extra room to complete sharp turns due to off-tracking, where the rear trailer wheels follow a considerably tighter path than the front wheels. Moving out to the right before turning left is a standard and necessary practice to keep the rear wheels on the carriageway.

Adım Adım Çözüm

1
Analyse the vehicle geometry and turning dynamics of an articulated lorry.
Recognise that because of the distance between the cab steering axle and the rear trailer axles, the rear wheels cut in sharply on corners.
Articulated vehicles have a swept path that requires a wider turning radius than smaller vehicles.
2
Evaluate the driver's positioning when preparing for a tight left-hand turn.
Determine that swinging towards the centre or offside creates the necessary clearance for the rear of the vehicle to negotiate the corner safely.
Failing to create this space would cause the rear wheels of the trailer to mount the kerb or strike obstacles.

Anahtar Kavram

LGV turning radius and off-tracking (swept path) behaviour at junctions
Tahmini Süre:45s
Soru 1519Soru →

You must not use front or rear fog lights unless visibility is seriously reduced to 100 metres (328 feet) or less.

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True
The Highway Code explicitly states that drivers must not use front or rear fog lights unless visibility is seriously reduced to 100 metres (328 feet) or less. Drivers must switch them off when visibility improves.

Adım Adım Çözüm

1
Identify the statutory visibility threshold defined in the Highway Code for operating vehicle fog lights.
The Highway Code defines seriously reduced visibility as 100 metres (328 feet) or less.
Fog lights produce an intense beam designed specifically to penetrate thick fog and heavy spray.
2
Determine whether fog lights are legally permitted when visibility exceeds this threshold.
Fog lights must not be used when visibility is greater than 100 metres.
Using fog lights in clearer conditions dazzles oncoming drivers and obscures rear brake lights from vehicles behind.
3
Evaluate the accuracy of the statement.
The statement correctly describes the legal requirement.
Drivers are legally mandated to keep fog lights off unless visibility meets the seriously reduced criterion.

Anahtar Kavram

Statutory conditions and visibility threshold for fog light operation under Highway Code Rules 226 and 236
Tahmini Süre:30s
Soru 1520Soru →

At a busy crossroads with no dedicated right-turn filter lanes, both you and an oncoming driver signal to turn right. What is the primary safety advantage of turning offside-to-offside (passing behind each other) rather than nearside-to-nearside (turning in front of each other)?

Cevabı ve açıklamayı göster

Cevap: It provides a clearer, unobstructed view of oncoming traffic traveling straight ahead behind the other turning vehicle

Cevap

Turning offside-to-offside provides a clearer, unobstructed view of oncoming traffic approaching straight behind the other turning vehicle.
According to Highway Code Rule 181, when turning right at a crossroads where oncoming traffic also intends to turn right, passing offside to offside (behind each other) is generally safer because it allows an open, unobstructed view of oncoming traffic traveling straight ahead in the opposing lane.

Adım Adım Çözüm

1
Evaluate the visual limitations of turning nearside-to-nearside at a crossroads.
Nearside-to-nearside turns position vehicles directly between each other and oncoming traffic, creating a severe visual blind spot.
When turning in front of an oncoming vehicle, the body of that vehicle can completely obscure oncoming vehicles or motorcycles traveling straight ahead in the opposing lane.
2
Analyze the sightlines established by passing offside-to-offside.
Passing behind the oncoming vehicle allows both drivers to see past each other's vehicles into the opposing traffic stream.
This alignment ensures that any oncoming vehicles traveling straight through can be seen before crossing their path.
3
Select the option that accurately describes this visibility benefit.
The correct response identifies the unobstructed view of oncoming traffic traveling straight ahead.
Highway Code Rule 181 highlights offside-to-offside as generally safer when visibility of oncoming traffic is critical.

Anahtar Kavram

Crossroads Right-Turn Positioning and Visibility (Highway Code Rule 181)
Tahmini Süre:1m 0s
ÖncekiSayfa 76 / 95Sonraki
Tüm alıştırma soruları — UK Driving Theory Test | Examkin